![]() ![]() |
|
![]() |
307 Air Conditioner Right / Left Direction Problem (Solved) |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
08.05.2020 19:55 | # 1 |
![]() |
|
When I came back from work this evening, I said, let me throw a hand on the air conditioning problem that constantly blows hot air to the driver's side since I bought the car. First of all, as a result of my research in the forum and on the internet, I came to the conclusion that this problem was due to the stripping of a cover or servo motor gear. I bought my torque wrenches at 7 in the evening and first downloaded the torpedo section completely and checked three servo motors. I understood the result of my checks that there was not a problem in the downward, upward and midward directions, but I still lubricated the servo motors well with the WD40. I went to the driver's side and first removed the steering wheel. (Included in the steering wheel.) I saw the servo motor that guided the cover, and what should I see, the cover plastic gear was broken. The real problem started here. I was stripping the engine, thinking that it should be lubricated, and constantly comforting myself. As a result, a servo motor running in my hand and a broken plastic cover gear. Meanwhile it was nine and a half and began to push in the dark. So far, I have never left the job I started in a car. I bought a pack of baking soda, a pack of cigarettes (needed for ash) and super glue from the market. I disassembled the engine, carbonated the gear first, I fed the broken place, then the ash of a cigarette beautifully, and last I steal the super glue and spray it with a spray. In the meantime, I made a few pieces of passers-by with my guitar standing in my trunk, and when I came back, I saw that the gear was like a stone. I put everything back and it's time to try. The result is excellent. Without any difficulty, the driver's side can make the hot cold transition. ![]() It's time to stabilize the speed. As far as I understand, my brake and accelerator pedal have the necessary hardware features. I ordered the handle. I don't have any trouble with the arm assembly. Only a few parameters are missing on the ECU side. If I complete them, I will activate and try the arm. If I do not have a problem, I will have provided everything I expect from a car. I share your pictures under this title. Wish everyone a good evening, thank you. Best regards. |
08.05.2020 19:55 | # 2 |
![]() |
|
If you go to elineze health teacher industry, masters will either break it well or want good money.
|
08.05.2020 19:55 | # 3 |
![]() |
|
Hello Soner, I hope you are fine? As you said, they asked me 400 TL in industry. Versem would definitely break the chest and say the cover will change. I spent time and I was able to. I'm happy. ![]() Thank you Best regards.
|
08.05.2020 19:55 | # 4 |
![]() |
|
I would like to get your opinion on a subject, Soner. I also had sagging in my ceiling interior. Do you have any knowledge of the materials I can use to fix them, and can we do it ourselves or should we have this done by a competent master like glow plug? Best regards.
|
08.05.2020 19:55 | # 5 |
![]() |
|
You're welcome. Well, I do not know much about that, but my neighbor had not received a price 3-4 months ago, they gave 200 TL for the ceiling. Of course, to do this, I think it is necessary to remove the flooring carefully.
|
08.05.2020 19:55 | # 6 |
![]() |
|
Thank you, Soner brother. I think I will do this to the upholsterer. As you said, I had to disassemble very carefully, I did not dare. I'm going to look for upholsterers in industry now, let's write the result here. I wish you good day, best regards.
|
08.05.2020 19:55 | # 7 |
![]() |
|
goodbye use your hands my health teacher I have the same problem on the left side and not always. If it repeats, I think I will start work like you. |
08.05.2020 19:55 | # 8 |
![]() |
|
Thank you hodja, I hope you don't have to deal with it again. It is a little difficult, but a successful result is achieved. Best regards. |
08.05.2020 19:55 | # 9 |
![]() |
|
Health to hand and arm has been a very useful sharing. Thank you very much for your effort. I hope nobody will encounter a problem because the places you disassemble and put them in a dark stress especially in the night darkness.
|
08.05.2020 19:55 | # 10 |
![]() |
|
I am thinking of starting this up tomorrow, but does anyone know how to remove that broken gear? |
08.05.2020 19:55 | # 11 |
![]() |
|
[QUOTE = JunioR56] It has been a very useful sharing of health from hand to arm. Thank you very much for your effort. I hope nobody will encounter a problem, because the places you disassemble and put them apart will put a different stress on the night. [/ QUOTE] Thank you teacher. It is nice to return again after a long treatment period :)
|
08.05.2020 19:55 | # 12 |
![]() |
|
[QUOTE = Peugeot35] I am thinking of starting this up tomorrow, but does anyone know how to remove that broken gear? Good luck with. That gear is attached to the cap. I know that you have to remove it completely before you can remove it. There are repair kits instead, I think it makes more sense to get it.
|
08.05.2020 19:55 | # 13 |
![]() |
|
get well hacom
|
08.05.2020 19:55 | # 14 |
![]() |
|
[QUOTE = JunioR56] get well soon hacom [/ QUOTE] Thank you, Respects.
|
08.05.2020 19:55 | # 15 |
![]() |
|
Good health to your hands. A 307 grandfather I looked at yesterday had the same problem and said that it cost 300-500 TL. It turns out that with a pack of cigarette shield glue and baking soda, the job could be solved: D
|
08.05.2020 19:55 | # 16 |
![]() |
|
I had the problem, as it is known summer, I gave 20 TL in auto elk and fixed the cold delivery. If it is winter, I will arrange it for 20 lira. ![]() |
08.05.2020 19:55 | # 17 |
![]() |
|
Where can I find this master in Istanbul.
|
08.05.2020 19:55 | # 18 |
![]() |
|
not a specialist like that, I had a random electrician in the industry
|
08.05.2020 19:55 | # 19 |
![]() |
|
There is a master ready repair kit. 60 liras each for one side. If you change both sides, it ends up to 150, including 120 pounds of labor. Information...
|
24.06.2020 10:52 | # 20 |
![]() |
|
Two years ago, I had a problem up and down. I went and bought a repair kit that cost 70 TL. When I asked the air conditioner, he wanted 500 TL from me.
|