307 abs problem please help.

friends, I did not show it to the master, but I want to get information from you, how much is the reason for the failure. stops, then goes out when walking.And no matter how much I press the abs, it strikes from the bottom, so the abs is constantly activated and when I reach 50 km speed, the abs fault lamp is on, of course, as soon as this lamp does not illuminate, the abs is cut off and the brake becomes a flat brake. I did not find the original one, but I made the lathe instead of getting the fault. I bought the car, he said, "I described the daisy, it is from the ball of flow, but the abs is okay at 50km, so let's say, so why don't we apply the brakes until the speed goes up to 50km?"

If the problem is electrical or if I know a mechanical failure, I will take it to the master accordingly but I couldn't solve it.

I have the same problem with me, the problem is with the sensors, I don't know 307, but it is not important, they said that it can flash even when you remove and install the rim at 306. Sometimes it goes out when it turns on, as you said, brother, but it works when it goes out. I got into a deep pit too, the axle ball was dislodged and then it started to light up. I Love My Pug 2011-10-28 18:23:51 < / editdat a>

I hope it is simple because it is necessary to have an electrician as soon as I touch the fireplace in the morning and go to the electrician.I thank you & nbsp;

You're welcome, brother, what does it mean?

abs from the shuttle valve makes the brakes tight, does it from the abs reader, the electrician cannot do anything to them, it will come out of the diagnostic tool problem & nbsp;

If the abs sensors in the tires are not in contact, this malfunction occurs. Have the abs sensors checked in the wheels.

[QUOTE = basrix] makes the abs from the shuttle valve, if the brakes are tight, do from the abs reader, the electrician cannot do anything to them. [/ QUOTE]

I know that the pads do when they run out. what is the condition of your linings.

front pads have not changed yet 1 month back has already changed the right front malfunction when I connect it to the computer, and I guess the owner had blown the ax before me. = "isChromeWebToolbarDiv" style = "display: n o ne">

My friend is probably caused by the sensors. We had megane II problem with the same sensors output malfunction.

thank you and i hope it will be fixed when you change the sensor.

First of all, get well, my brother. He's a very good person. I have timing, brakes and maintenance there. Ask me if you want to show me. God forbid you have to look before you get a bigger trouble ....

Thank you brother, my master is not in a hurry, but when the 50km speed is constantly in the circuit, the abs is completely disabled.

Isn't there a problem in the abs brain, everyone said sensor but not from the ins brain:)

I was afraid of the brain, but when I look at the computer from the computer, it says right front wheel.

the right shot from ten wheels, before the car oozed & nbsp; either after the lathe process or how you couldn't find the original of the flow from the sensors or the big Ankara: D

Actually, I would find it, but my father got it to me, so that I wouldn't let it go. It is not possible to have it done. Being an officer is such a thing.

Hi friends, the subject is old, but I have the same problem. Abs when the vehicle moves, the pedal even slightly touches the brake immediately starts hitting and the abs fault message appears on the screen.

where did the master look? Abs sensor can be a nuisance. or there may be a problem with the abs bearing in return for the reader.