![]() ![]() |
|
![]() |
307 ABS AND BRAKE PROBLEM |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
08.05.2020 20:33 | # 1 |
![]() |
|
My car 2005 model 307 SW 1.6 HDI 110 PS For the past few weeks, some problems have started to appear on the brakes of my vehicle. 1. ABS, especially at 20-30 km / h speed, is activated even if I touch the brake lightly. He doesn't do it all the time, but he does it often enough to be annoyed. 2. The rigidity of the brake pedal is uneven. The brake pedal is harder than usual at times, which is rare. 3. This was just one time I wrote: I touched the brake on the straight track and the right lining grabbed the disc, while the left lining reacted as if it did not grip at all or too little. I tried it 5-6 times, and as the car braked, it constantly turned its nose to the right. I pulled the vehicle to the right in a controlled manner. I turned off the ignition and restarted the vehicle. It got better when he took a few stops and pumped the brake. I was thinking about these problems that the brake discs and pads are about to expire. Last week, I replaced the front discs and pads; but the problems continue in the same way. I would appreciate if friends with experience in a similar situation help. Thanks in advance. |
08.05.2020 20:33 | # 2 |
![]() |
|
Sir, if you have replaced disc linings, replace the brake fluid. One may also be missing the headquarters.
|
08.05.2020 20:33 | # 3 |
![]() |
|
[QUOTE = sonerkyl] If you have replaced my disc disc pads, also replace the brake fluid. One may also be missing the headquarters. [/ QUOTE] You are right. It may also be helpful to replace the brake fluid and try it out. I would be glad if a friend who also encounters the same or a similar problem also writes. Thank you, the masters in Söke are infuriating. I entrusted the vehicle to a good (!) Master this morning. About to go and get it in the afternoon ... When I went in the afternoon, I realized that they never touched the car. Apparently they didn't even have a clue about the problem. So the idea of friends in the forum is important to me. |
08.05.2020 20:33 | # 4 |
![]() |
|
Brake centers came to my mind. But replace it in hydrolysis. Also, it is necessary to check the back pads and sometimes there is a different rate of wear.
|
08.05.2020 20:33 | # 5 |
![]() |
|
I have a similar one. When I got it connected to the computer, a sensor on the left wheel did something because he saw something in the wheel ball, said the master. Bicaç made a correction with a hammer, but he does it occasionally. It feels like the car is inventor. Maybe it's like your friend.
|
08.05.2020 20:33 | # 6 |
![]() |
|
[QUOTE = childrenofgrave] Hello everyone, My car 2005 model 307 SW 1.6 HDI 110 PS For the past few weeks, some problems have started to appear on the brakes of my vehicle. 1. ABS, especially at 20-30 km / h speed, is activated even if I touch the brake lightly. He doesn't do it all the time, but he does it often enough to be annoyed. 2. The rigidity of the brake pedal is uneven. The brake pedal is harder than usual at times, which is rare. 3. This was just one time I wrote: I touched the brake on the straight track and the right lining grabbed the disc, while the left lining reacted as if it did not grip at all or too little. I tried it 5-6 times, and as the car braked, it constantly turned its nose to the right. I pulled the vehicle to the right in a controlled manner. I turned off the ignition and restarted the vehicle. It got better when he took a few stops and pumped the brake. I was thinking about these problems that the brake discs and pads are about to expire. Last week, I replaced the front discs and pads; but the problems continue in the same way. I would appreciate if friends with experience in a similar situation help. Thanks in advance. [/ QUOTE] S bro, the same problem happened to me Let me explain my problem, sometimes the brake pedal was too sensitive and too hard, so even if I was on the move, it brakes spontaneously and the car was going too hard, it would be fixed when it brakes a few times. We handled the problem like this: 1. The handbrake was pulling 3 teeth, we pulled it to 6.7 teeth 2. Hydraulic exchange 3. Ten brake centers have been completely disassembled and cleaned beautifully, especially there are movable pins that hold the caliper 13 bolts fastened. There is a pejo master in the capital industry, I can send it there |
08.05.2020 20:33 | # 7 |
![]() |
|
[QUOTE = mehmetmarmara] Similar to me. When I got it connected to the computer, a sensor on the left wheel did something because he saw something in the wheel ball, said the master. Bicaç made a correction with a hammer, but he does it occasionally. It feels like the car is inventor. Maybe it's like your friend. [/ QUOTE] Thank you. |
08.05.2020 20:33 | # 8 |
![]() |
|
[QUOTE = Crzmt] [QUOTE = childrenofgrave] Hello everyone, My car 2005 model 307 SW 1.6 HDI 110 PS For the past few weeks, some problems have started to appear on the brakes of my vehicle. 1. ABS, especially at 20-30 km / h speed, is activated even if I touch the brake lightly. He doesn't do it all the time, but he does it often enough to be annoyed. 2. The rigidity of the brake pedal is uneven. The brake pedal is harder than usual at times, which is rare. 3. This was just one time I wrote: I touched the brake on the straight track and the right lining grabbed the disc, while the left lining reacted as if it did not grip at all or too little. I tried it 5-6 times, and as the car braked, it constantly turned its nose to the right. I pulled the vehicle to the right in a controlled manner. I turned off the ignition and restarted the vehicle. It got better when he took a few stops and pumped the brake. I was thinking about these problems that the brake discs and pads are about to expire. Last week, I replaced the front discs and pads; but the problems continue in the same way. I would appreciate if friends with experience in a similar situation help. Thanks in advance. [/ QUOTE] S bro, the same problem happened to me Let me explain my problem, sometimes the brake pedal was too sensitive and too hard, so even if I was on the move, it brakes spontaneously and the car was going too hard, it would be fixed when it brakes a few times. We handled the problem like this: 1. The handbrake was pulling 3 teeth, we pulled it to 6.7 teeth 2. Hydraulic exchange 3. Ten brake centers have been completely disassembled and cleaned beautifully, especially there are movable pins that hold the caliper 13 bolts fastened. There is a pejo master in the capital industry, I can send it there [/ QUOTE] I Aleykümselam, Teacher, there is no problem in my vehicle like self-braking, not going hard. But I think the problem is due to similar situations. Like you said; I will change and try the hydraulic first, if there is no improvement, I will look at the main center or calipers. The subject of the handbrake made me think too. Because the hose that went to the left rear caliper expanded when it applied the hand brake and sometimes it came out of its seat. My hand brake holds 2-3 teeth. Unfortunately, I am not close to Ankara and I live in Aydın. Thank you for the information you provided. Thanks to the problem has become concrete. |
08.05.2020 20:33 | # 9 |
![]() |
|
[QUOTE = childrenofgrave] [QUOTE = Crzmt] [QUOTE = childrenofgrave] Hello everyone, My car 2005 model 307 SW 1.6 HDI 110 PS For the past few weeks, some problems have started to appear on the brakes of my vehicle. 1. ABS, especially at 20-30 km / h speed, is activated even if I touch the brake lightly. He doesn't do it all the time, but he does it often enough to be annoyed. 2. The rigidity of the brake pedal is uneven. The brake pedal is harder than usual at times, which is rare. 3. This was just one time I wrote: I touched the brake on the straight track and the right lining grabbed the disc, while the left lining reacted as if it did not grip at all or too little. I tried it 5-6 times, and as the car braked, it constantly turned its nose to the right. I pulled the vehicle to the right in a controlled manner. I turned off the ignition and restarted the vehicle. It got better when he took a few stops and pumped the brake. I was thinking about these problems that the brake discs and pads are about to expire. Last week, I replaced the front discs and pads; but the problems continue in the same way. I would appreciate if friends with experience in a similar situation help. Thanks in advance. [/ QUOTE] S bro, the same problem happened to me Let me explain my problem, sometimes the brake pedal was too sensitive and too hard, so even if I was on the move, it brakes spontaneously and the car was going too hard, it would be fixed when it brakes a few times. We handled the problem like this: 1. The handbrake was pulling 3 teeth, we pulled it to 6.7 teeth 2. Hydraulic exchange 3. Ten brake centers have been completely disassembled and cleaned beautifully, especially there are movable pins that hold the caliper 13 bolts fastened. There is a pejo master in the capital industry, I can send it there [/ QUOTE] I Aleykümselam, Teacher, there is no problem in my vehicle like self-braking, not going hard. But I think the problem is due to similar situations. Like you said; I will change and try the hydraulic first, if there is no improvement, I will look at the main center or calipers. The subject of the handbrake made me think too. Because the hose that went to the left rear caliper expanded when it applied the hand brake and sometimes it came out of its seat. My hand brake holds 2-3 teeth. Unfortunately, I am not close to Ankara and I live in Aydın. Thank you for the information you provided. The problem has become concrete, thanks to you. [/ QUOTE] Thank you bro Just let me point out, look at the brake center as a last resort. |