Peugeot Forums - Peugeot Fan Club

307 1.6 hdi error codes help

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
28.07.2022 22:43 # 1
karaca61
P1162

Electric EGR valve position repeat signal

P0401













div>
Air circuit

Electric EGR valve position repeat signal

P0409

P0409

Preheat relay circuit

P1351

Flowmeter signal

P3008

Flowmeter signal

P0104

P0341

Camshaft signal. I would appreciate it if you could help me fix the errors
28.07.2022 22:51 # 2
karaca61

EDC16C3 READING FAULTS

P0490 Electric EGR valve position repeat signal

P1162 Electric EGR valve position repeat signal

P0401 Air circuit Electric EGR valve position repeat signal

P0409 Preheat relay circuit

P1351 Flowmeter signal

P3008 Flowmeter signal

P0341 Camshaft signal

31.07.2022 21:07 # 3
karaca61
S.a friends, I would appreciate if you could help, thank you in advance, have a good evening.
01.08.2022 11:57 # 4
antipollution


Brother, the EGR is clogged, you need to remove it and clean it or blind it directly, that is, cancel it.
The glow plug, glow plug, as you know it called preheating At least 1 out of 4 is broken.
You can try to clean the MAF and MAP sensors with cleaning spray in case of flowmeter signal error.
I hope the eccentric reader sensor is broken in the last one.

What Causes P0341 Fault Code?

  • - Camshaft sensor wires routed too close to spark plug wires (causing interference) li>
  • - Loose wiring at the camshaft sensor
  • - Loose wiring at the engine control module
  • - Defective camshaft sensor
  • - Damaged reluctor wheel< /li>
  • - Faults related to timing components (E.g. timing chain lengthening, or faulty timing chain tensioner (other fault codes are also set))
  • - In rare cases, the crankshaft position sensor is defective (other fault codes are also set)
03.08.2022 03:16 # 5
karaca61
thank you for your answer
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”