307 1.6 petrol transmission

friends how much the ball change in the gearbox
vehicle started making 1.6 xt 307 petrol manual sound
going nuts

I made it for 150 TL, I hope I didn't eat a pile. It sounded like an airplane. Now I'm quietly riding.

Hodja, what kind of voice is there? When I press the clutch, it ceases, but when it stops, it does not. They said exactly, the transmission ball will change, is it true? No sound when the engine is cold.

flywheel if it cuts the clutch pressure. If it is continuous, it is a ball. hamzaoglu 2014-04-08 00:24:16

I also have a sound. Mine makes it in 1st and 2nd gear when the engine is warming up. In 2500s, the sound is similar to the sound made by an eccentric rotating part.

the piece is not very expensive, but to replace it, the pressure pad is dismantled.

As far as I know, that ball makes a sound when it presses the earthquake and cuts it. In my old car, I changed it while the pressure was changing the pad, then the sound on the engine was gone when I was pressing from the clutch.

friends 4. What is your interpretation?

[QUOTE = cavit cevo] friends 4. There is a fine tizz sound in 5 gear What is your comment?
[/ QUOTE] just like my 307 grandfather cavit friend has the voice he talked about.

First of all, don't overdo it, the 307s are noticeable. The ball is not worth the money. The pressure is not important.

I bought my car recently, it was not at first, but some of the reverse gear was running, it was a full night, then I showed this fine sound output to the master.

Take a banana inside, eat it in the shell and put it in the gearbox for 3 months, then you get zero transmission =)) 2. These tricks have a lot of chips, the room works =)

Guys, such a voice exists in my car too, but my car is autm. gear. it is interrupted when the gear shifts, not pressure. As the speed increases, the roar increases like the sound of the airplane, the gear shifts and the sound decreases when the speed drops, and again the roar starts again when the speed rises.

friends, we have completely removed the gearbox, lean molded gears have burned all the balls have changed.
But in 4-5 gears, the gearbox whistles and makes it because of the gears.