![]() ![]() |
|
![]() |
307 1.6 HDI chills, noisy work and interruption |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
08.05.2020 20:48 | # 1 |
![]() |
|
My car 2005 model 307 222.000 km, the car was trembling very much on departures, it was getting noisy and knocking, it was making interruptions while on the road. (https://www.youtube.com/watch?v=Bs6dAHteTrw) it was as if they were holding the car from behind, I changed the turbo pressure valve, the solenoid valve, the problem was corrected, the flow meter was dirty, I cleaned it, vibration and noisy work went away. It is only necessary to be careful when installing the solenoid valve, thin hoses can get mixed up, so it has happened to me, the vehicle protects itself and does not exceed 3 thousand cycles, the fault light is on. when the hoses are attached upside down, it gives the photographic malfunctions. In addition to these malfunctions, the glow relay circuit also gave another error, saying that there is no error, the room has improved. photo: https://hizliresim.com/lO8bnk ![]() |
08.05.2020 20:48 | # 2 |
![]() |
|
I'm glad that your problem is resolved, hodja. Thanks in return and informative.
|