|
|
|
|
306 Torsion Lowering Operations |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 306 | |
| 08.05.2020 14:02 | # 1 |
 hasimayaz |
|
                    |
|
| 08.05.2020 14:02 | # 2 |
 HakanGokdemir |
|
|
Health for Hashemite Labor ... If I can find a familiar lift, I will do it myself, this time I have experience from lowering torsion, as well as saxso and 306 places will guide me exactly, the system has different locations of the same screws maybe :)
|
|
| 08.05.2020 14:02 | # 3 |
| HakanGokdemir |
|
|
Meanwhile, the grease it uses is a high-temperature grease, it caught my attention ... |
|
| 08.05.2020 14:02 | # 4 |
| hasimayaz |
|
|
[QUOTE = hakan1203] Good health for Hashemite labor ... If I can find a familiar lift, I will do it myself, this time I have experience from lowering torsion, as well as saxso and 306 places will guide me exactly, the system has different locations of the same screws maybe :) [/ QUOTE] 206, 306, 106 systems are the same, as you said, only screw sizes and locations are slightly different. You will only need dummy absorber and puller. In the article 106 there is information for the shock absorber. 2 tabs will boil the old shock absorber, and it will be over. Find an old hawk axle inside the puller bar, and if you boil a heavy iron bar on the outside, you can boil a suitable amount of bolt.
|
|
| 08.05.2020 14:02 | # 5 |
| HakanGokdemir |
|
|
[QUOTE = hasimayaz] [QUOTE = hakan1203] Health to Hashim's labor ... If I can find a familiar lift, I will do it myself, this time I have experience from lowering torsion, as well as saxso and 306 places will guide me exactly, the system has different locations of the same screws maybe :) [/ QUOTE] 206, 306, 106 systems are the same, as you said, only screw sizes and locations are slightly different. You will only need dummy absorber and puller. In the article 106 there is information for the shock absorber. 2 tabs will boil the old shock absorber, and it will be over. Find an old hawk axle inside the puller bar, and if you boil a heavy iron bar on the outside, you can boil a suitable amount of bolt. [/ QUOTE] If I can find time in the workplace, I have come to the workshop and get the welding works you said, and I have supplied the parts from the extractor. This work is done in the factory, but the hardest thing is if I buy a lift, Haşim? 5000-8000 TL on Hepsiburada.com ...  Thank you Haşim for your information ...
|
|