306 Oil Splashed

Good evening, friends, I wanted to test my car's heating system after I went home after work yesterday morning. I toured a little during normal times, the temperature came to the 70s, I opened the heating system and I was glad that it was a nice hot weather. When I returned home, I could not resist, I said a space like a bidet, I went in 2nd gear, there was a red light in the future, I saw that steam got into the car when it was slowing down, I stopped, I looked, steam came out of the hood, I pulled right to the right, I opened the hood, I saw what the bidet was, the top of the engine and the part of the hood aligned to the engine is full oil! I checked the top cover, it was firmly in place, the engine dipstick was out of place, I had witnessed that the stick had come out a few more times before. I checked the engine manually and visually. I couldnt find it. Could the rod be gushing from there, would this fat friends be on the go? When I opened the hood, I was horrified, I looked at the mirror officially, I became like paper. If not .. The car was working as if it was going to stop the room, I think I am waiting for your help and your opinions because of the oil, my dear friends.

If there was another place, you would see it again, if it was cold already, it would normally be thrown out in the bottom.

The same thing I guess had happened to Osman.Foreverfbydi niki sold his car but it will help if he still sees us

Thanks guys, I guess the vehicle wouldn't work if there was any other problem? It was imperative to buy a new oil dipstick 3-5 times, it was displaced, but when it gasped, it threw oil out of it. I think the oil burned from the temperature of the engine on top of the engine.

get well soon friend

Thank you my brother, thank you, I panicked at the first moment, I thought the engine was on the side, I stopped, and I saw that it was a very bad scene with oil gushing, but I guess from the stick I hope

Does your engine have a cover like the water pictured? What kind of big HDI is written on it?
Picture 406.

[QUOTE = I Love My Pug] Thank you bro my brother, I panicked at first, I thought the engine was burning, I stopped looking, it was a very bad scene with oil gushing, but I guess I hope from the stick [/ QUOTE]
don't worry my brother, Change that bar as soon as possible. it does not come to neglect. I have been in the car for a month, I had the warning that there was no oil in the car in the morning, I could not tell the fear I had at that moment even though I was in a suit, I leaned and looked under it. jewelry until you ask your friends here :)
oil should be paid attention ...

[QUOTE = koliva] Does your motor have a cover like the water pictured? Behold, the genre with huge HDI written on it?
Image is from 406. /2766_18lo.jpg "height =" 198 "width =" 302 "border =" 0 "/>
[/ QUOTE]

This is my brother engine

& nbsp;

[QUOTE = htasay] [QUOTE = I Love My Pug] Thank you bro bro, I panicked at the first moment, I thought the engine was burning, I stopped, I looked, it was a very bad scene with the oil gushing out, but I guess from the stick I hope [/ QUOTE]
Don't worry brother, you change that bar as soon as possible. it does not come to neglect. I have been in the car for a month, I had the warning that there was no oil in the car in the morning, I could not tell the fear that I was living in the car, although I was in a suit, I leaned and looked under it.
oil should be careful until you ask your friends here :) [/ QUOTE]

I think you opened a topic about oil the other day. It was about putting too much oil if I'm not mistaken. ultimately he needs to drain the oil from the place by pressure. this is either from the top cap gasket, the oil cap or the dipstick.

[QUOTE = maverick] you posted an oil related topic the other day. It was about putting too much oil if I'm not mistaken. [/ QUOTE]

[QUOTE = I Love My Pug] [QUOTE = maverick] you posted an oil related topic the other day. It was about putting too much oil if I'm not mistaken. I think it might be because you added [/ QUOTE] [/ QUOTE] maverick 2011-10-20 23:16:56

This problem happens a lot in the 206s and 406s, but this happens when one of the fastening points under the cover that says HDI is broken. Together with the lid, it pulls up the oil cubes.

See what I wrote below as a comment, I write what comes to my mind. The problem may be in a very simple place. I guess this is probably the worst possible thing I will write. We can argue further.

Normally, the cubes should not be thrown away. I think it is because of the pressure exhaust gas entering the oil circulation system from somewhere. Especially when you have loaded it, the pressure has increased and it is the easiest place to get out of the oil cubes. If you ask where this exhaust gas can enter, I would say the piston rings are most likely.
koliva 2011-10-20 23:14:53

[QUOTE = maverick] [QUOTE = I Love My Pug] [QUOTE = maverick] I think you posted a topic about fat the other day. It was about putting too much oil if I'm not mistaken. [/ QUOTE] [/ QUOTE]

[QUOTE = I Love My Pug] [QUOTE = maverick] [QUOTE = I Love My Pug] [QUOTE = maverick] I guess you had a topic about oil the other day. It was about putting too much oil if I'm not mistaken. I think it may be because you put too much oil. ultimately he needs to drain the oil from the place by pressure. this is either from the top cover gasket, the oil cap or the dipstick. [/ QUOTE] Yes, I opened it, it is oil, let's go, everywhere we got oil morning morning :)) the oil was not much but I guessed it flushed with it, now I pour this existing oil Do you have any special oil for GTI engine? When I haven't heard before? [/ QUOTE] suggests peugeot total. you probably use 10w 40. my oil time is approaching. When I bought the car, it was 2000 km. but I will definitely put a magnatec. I don't know the oil on top of it. [/ QUOTE] In my previous post I put a link with the comments of magnatec users. I think it's the best. my previous car mazda lantisti.From the moment I put the magnatec, the engine sound even changed. my vehicle was more relaxed. the best oil in my opinion. I personally don't recognize oil on top of it on the market.shell is good oil on mobile, but castrol is the choice of cars for this. You cut it out. Yes, every time I open the hood, the label of the Totalin catches my eye, I think Magnatec castrol is the best I put my shoulder from it? [/ QUOTE]

[QUOTE = koliva] This problem happens very much in the 206s and 406s, but this happens when one of the fastening points under the cover with HDI breaks. Together with the lid, it pulls up the oil cubes.

See what I wrote below as a comment, I write what comes to my mind. The problem may be in a very simple place. I guess this is probably the worst possible thing I will write. We can discuss it more. I think it is because of the pressure exhaust gas entering the oil circulation system from somewhere. Especially when you have loaded it, the pressure has increased and it is the easiest place to get out of the oil cubes. If you ask where this exhaust gas can enter, I would say the piston rings are most likely.
[/ QUOTE] < DIV> & nbsp;

Let me help you now, I have 206 exhaust mounted on the vehicle, so I got an abart exhaust, but I couldn't find the original 306 GTI exhaust, I am waiting for the news. naturally. Instead of a 60 pipe, an exhaust of a 1.6 vehicle with a 2.0 engine is mounted at the top of the vehicle.

& nbsp;

I think it's true in the other determination, because my part is broken, I asked the engine master, he said something urgent is not part of the repair, It didn't make any sense to me but I don't know?

[QUOTE = maverick] [QUOTE = I Love My Pug] [QUOTE = maverick] [QUOTE = I Love My Pug] [QUOTE = maverick] I think you posted an oil related topic the other day. It was about putting too much oil if I'm not mistaken. I think it may be because you put too much oil. ultimately he needs to drain the oil from the place by pressure. this is either from the top cover gasket, the oil cap or the dipstick. [/ QUOTE] Yes, I opened it, it is oil, let's go, everywhere we got oil morning morning :)) the oil was not much but I guessed it flushed with it, now I pour this existing oil Do you have any special oil for GTI engine? When I haven't heard before? [/ QUOTE] suggests peugeot total. you probably use 10w 40. my oil time is approaching. When I bought the car, it was 2000 km. but I will definitely put a magnatec. I don't know the oil on top of it. [/ QUOTE] In my previous post, I put a link with comments from those using magnatec. I think it's the best. My previous car was Mazda lant. Even the sound of the motor has changed since I put the magnatec. as if my vehicle was more relaxed. the best oil in my opinion. I personally don't recognize oil on it in the market. shell, mobile is also good oil, but castrol is the main thing. The choice of wrc cars. You cut it out. Yes, every time I open the hood, the totalin tag catches my eye. Magnatec is castrol. I guess the best thing is that I put it on him. [/ QUOTE] Thank you bro :)) You get the right diode wrc.

http://forum.donanimhaber.com/m_6792166/ mpage_2 / tm.htm maverick 2011-10-20 23:39:14

It is normal to have a rubber gasket on the top of the oil dipstick of the vehicle, otherwise it is normal for your vehicle to remove the rod with the engine pressure it generates at high speed. It will burn before 1 week passes (it happened to me) and it will be possible to lock the engine before the engine oil runs out.When your car is running, stop immediately when the valve sound is running and check your oil. "style =" display: n o what ">