![]() ![]() |
|
![]() |
306 movement situations |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 306 |
08.05.2020 16:42 | # 1 |
![]() |
|
recently my car did not open a fan and the fans did not come into play even though I pulled the cable connected to the motion sensor. div> I left the master now at 80 degrees as if it is opening full alone, the problem that is stuck in my head is that before making this fault, the fan on the left side turns and I would not hear it. Someone will say the air conditioning fan, I know it only before this malfunction, the fan on the left is running. Does my car have a ...... or master? |
08.05.2020 16:42 | # 2 |
![]() |
|
In any case, I know that both fans must work. The voltage at low speed is divided into both fans and they operate at half speed. In the fast mode, both fans receive voltage from the line and they operate at full speed. Reviews
|
08.05.2020 16:42 | # 3 |
![]() |
|
Thanks for your answer to the koliva, only one of them works at full speed, and it does not fall from 80 to 80. This is normal.
|
08.05.2020 16:42 | # 4 |
![]() |
|
[QUOTE = volcanbalik] Thanks for your response, only one of them is running at full speed, and it does not fall from below 80. Is this normal? [/ QUOTE] It is quite normal not to fall down. The fan in Yavas mode should turn on 97 and turn it off at 90. If your slow fan does not work, then it enters the fast mode at 107 degrees. So if your low fan doesn't work at all, your temperature indicator should be between 80-107. If you want your peace of mind, let's connect your car to PP2000 and check if your fans are working there one by one. Reviews |
08.05.2020 16:42 | # 5 |
![]() |
|
Thank you for your answer, my friend, I will connect it to a computer as soon as possible and see where the vehicle caused the error because I love my car ........
|