Peugeot Forums - Peugeot Fan Club

306 Mirror Foil Coating (Installed on the vehicle)

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 306
08.05.2020 16:15 # 1
Guests
Hello friends. In the evening, I was bored, my dear, I went to the workshop, and as the right left was playing, the red matte foil left from my Colonel was warm. I said, where can I evaluate this? I came to my mind with 1 team mirror. Previously, I bought 1 set of mirrors and I put the originals on the vehicle and put them aside. I took the foil in the hand and stretched it in heat, and I made the first foil coating. Although I did it for the first time, it was not bad at all. You shouldn't leave any air bubbles as much as possible. It happened when I burned it in my hand while it was heating. On one hand, if I was going to hold the machine on one hand, I would keep the mirror on the other hand, I would stretch the foil and so on. I expect my colonel to continue the foil and cover it in the other mirror and put it in the car. A lot of tools were added from here. All of them are walking in the trunk of the car every day 2. Covering the mirror My colonel brought the foil to the rest, and we covered the other mirror together. Of course, it was much more beautiful than the first one ... My colonel, my friend, the victim of health, the mirror mounted on the vehicle.
08.05.2020 16:15 # 2
EmRe26
Successful brother to labor. The red mat is pleasant.
08.05.2020 16:15 # 3
Guests
Meanwhile, I have my ears creaked. "Ameeeeeeet don't wait, continue eeeeeeeeeet" "Grin"
08.05.2020 16:15 # 4
zavur
There will be copying, but the same work is close & nbsp; "Grin" it was fine
08.05.2020 16:15 # 5
Muhammet CAKIR
If you see how it will stay on your car, let's see the white red matte gderm :)
08.05.2020 16:15 # 6
Guests
[QUOTE = EmRe26] successful brother labor. The red mat is pleasant. [/ QUOTE]
& nbsp;
Obviously I had this I got it. I would prefer it to be bright personally. Actually, I am thinking of making it shiny. I think it will be more remarkable. & Nbsp; This matte red foil is the same as our Undertaker Emre brother's car ... "Blink"
08.05.2020 16:15 # 7
Guests
[QUOTE = Muhammet ÇAKIR] beautiful brother :) let's see how it will look on the car, let's see the matte red germ white to white:) [/ QUOTE]
& nbsp;
Here it looks like an orange matte shade of matte red. Sank it will not look good but we tried "Blink" & nbsp; I'm thinking about twinkling
08.05.2020 16:15 # 8
Muhammet CAKIR
[QUOTE = CeCoLi] [QUOTE = Muhammet ÇAKIR] beautiful brother :) we'll see how it will look on the car, let's see the matte red glow white:) [/ QUOTE]
& nbsp;
Here it looks like an orange matte shade of matte red. Sank it will not look good but we tried "Blink" & nbsp; I think it will shine brightly.
08.05.2020 16:15 # 9
Guests
I think it is a very nice and different idea. When your car is white, red will look nice. When are you throwing your hands close to the ceiling?
08.05.2020 16:15 # 10
zavur
Does the ceiling foil need to be operated in the license?

zavur 2011-10-18 01:04:16
08.05.2020 16:15 # 11
Guests
[QUOTE = Alicangulpinar] I think it's a very nice and different idea. When your car is white, red will look nice. When are you throwing a hand on the ceiling, is it close? [/ QUOTE]
& nbsp;
Ceiling heat standby. There is a topic I am waiting for. If this is the fate I will do, "Blink" & nbsp; If I cover the other mirror, I will be wondering immediately after that I will wear it
08.05.2020 16:15 # 12
Guests
[QUOTE = poor] Does the ceiling foil need to be operated on the license?

[/ QUOTE]
& nbsp;
Actually, you have to get it wet right there ...
08.05.2020 16:15 # 13
Guests
In the meantime, it should be nice to have a workshop where people can work & nbsp; "Laugh"
08.05.2020 16:15 # 14
Guests
[QUOTE = Alicangulpinar] Meanwhile, it should be nice to have a workshop where people can work & nbsp; "Laugh" [/ QUOTE ]
& nbsp;
This is the worst ever "Blink" & nbsp; one side on the side, the biggest one in Maslak "Laugh"
08.05.2020 16:15 # 15
Guests
Ahh ahh gungoren, there is a big idle shop under the house, from the big one to the brim where a 45lik 302 can enter, I am full of all my uncle who wears my uncle full of mersos. HuseyinTurk 2011-10-18 01:43:27
08.05.2020 16:15 # 16
Guests
Good health, I am on glossy foil, it has a nice coating, no flaws, I think & nbsp; "Laugh" If we use blow dryers instead of these heat machines, can we get the same efficiency ??
08.05.2020 16:15 # 17
Guests
I wish it had a carbon application:) & nbsp;
08.05.2020 16:15 # 18
Guests
Brother Has Been Much Better Than I Guess ...
Health in Hand;

Let me Find Bright Red; Let's try the bidet with bright red both mine and yours ...
08.05.2020 16:15 # 19
Guests
[QUOTE = csalli] I am in good health, I am on the glossy foil, it has a nice coating, no flaws in my opinion & nbsp; "Laugh" Also, can we get the same efficiency if we use blow dryer instead of these heat machines ?? [/ QUOTE]
& nbsp;
In this foil I applied, I used a sheet metal drying machine that produces good heat. It was quite enough. If it is a heat gun, it is necessary to cut it down or it may burn. The foil is already softening the heat, like cotton "Laugh"
08.05.2020 16:15 # 20
Guests
[QUOTE = EmRaH] I wish it was a carbon application:) & nbsp; [/ QUOTE]
& nbsp;
Sagolas, brother. I don't think of carbon application. I want to cover the torpedo panel at a convenient time "Blink"
Page : / 7
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”