Peugeot Forums - Peugeot Fan Club

306 help

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 306
02.06.2020 12:45 # 1
Serkan113344
Hello, good forums. I bought a 306 griffe a month ago and when I bought it, there seemed to be no problem, but a week later, the gasket exploded without heat, my master said it was caused by the tube brain. Anyway, the top cover was stoned, the valves were stoned and the gasket was originally installed, and the fabricated gasket came out from the top, the cap never opened before said my master. After that, a metal sound started to come from the engine of the car and the temperature does not go down from 100 even at idle yesterday, I entered a congested traffic and it rose to 110 quickly, I pulled aside and waited for it to fall, I tried to see if the water was turned on and reduced, as soon as I turned the lid, it started throwing water from the edge and I closed it without opening. I know that this is normal or there is a remedy for these cars, I know the valve adjustments need to be made again, because of the low speed gas cut-off and the metal sound in the engine, but the heat, I do not know what to do, by the way, I use the car in gasoline because I do not have time to make the tube brain.
02.06.2020 15:23 # 2
sonerkyl
First of all, welcome to us. Timing and circulation pump replacement when the top cover is removed. When the vehicle comes to 110 degrees, do you pay attention to the fan?
02.06.2020 15:35 # 3
Serkan113344
Thank you. The trigger and the recirculation did not change, the master did not say anything about it. We turned on the fan at 110 and also checked when it cooled, there was no water reduction, the oil was on the ground when it should be Serkan1133442020-06-02 15:40:09
02.06.2020 16:04 # 4
sonerkyl
You can see it up to 110 degrees. It was 206 in me, the city is in congested traffic. As you said, the important thing is not to decrease and mix water and oil. It is wrong to change the timing and circulation in the overheated vehicle. that belt is scorched. should have changed
02.06.2020 18:22 # 5
Serkan113344
The car did not overheat when the gasket exploded. As a result of the breakdown of the diaphragm in the tube brain, the water mixed with gas, which exploded the gasket. There is no problem such as smoke in the car, I do not think it will be from the gasket again, but I will go back to my master as soon as possible, I will have the cooling system checked from the beginning to the end. Serkan1133442020-06-02 18:26:03
04.06.2020 10:25 # 6
sonerkyl
I understand teacher. Do you have antifreeze?
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”