Peugeot Forums - Peugeot Fan Club

306 gti idling disorder

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 306
08.05.2020 16:22 # 1
gurselgurel306gti
thank you in advance about the answers ... my vehicle & nbsp; it gives gas to itself while idling, and when the rpm is falling and the car is running too fast, it is stuck at 2000 rpm.
08.05.2020 16:22 # 2
KenBlockJR
clean the throttle
08.05.2020 16:22 # 3
gurselgurel306gti
I cleaned it even changed the wire but it didn't work
08.05.2020 16:22 # 4
Ucyuzalti
The same problem started with me & nbsp; They fixed the gas setting for LPG. LPG has improved. It started at gasoline this time. The idle rises and goes down between 10 and 8.
08.05.2020 16:22 # 5
kenan_gul
idle valve or idle engine or what ole bisey diolar but :)
08.05.2020 16:22 # 6
Ucyuzalti
Idle valve & nbsp; "Big if I find it, I will clean it in the engine rogue "LOL"
08.05.2020 16:22 # 7
kenan_gul
[QUOTE = Trifold] Idle valve & nbsp; "Big if I find one, I will clean it in the engine, i'm going to clean it, [/ QUOTE]

I know where you are ... in the master said this but ... how to clear it: ) Reviews
08.05.2020 16:22 # 8
Ucyuzalti
When I find it, I will clean it & nbsp; "Big
08.05.2020 16:22 # 9
SAHIN PEUGEOT EMRE
The rolenti engine may be defective, but if you find the rolenti engine you have no chance to clean it because it is a part that changes when it breaks down
08.05.2020 16:22 # 10
gurselgurel306gti
I asked the master, the idler engine was defective, the new one was between 350 TL and 400 TL, I cleaned the idle valve and the butterfly, but the problem was not cut .... "Angry"
08.05.2020 16:22 # 11
SAHIN PEUGEOT EMRE
So the problem is that you will get it clean in the rolenti engine or you will have to get it zero.
08.05.2020 16:22 # 12
gurselgurel306gti
It was a problem to ourselves, astonishment, something, friend, I don't understand how it happened. Well, I need to remove the cylinder paper for this to change.
08.05.2020 16:22 # 13
gurselgurel306gti
I think there is a master who misled me, peugeot, the engine does not need to be dismantled, the top cover needs to be dismantled, and so on.
08.05.2020 16:22 # 14
serommm
My teacher had the same problem in my grief. The master who made me say what the blockage of the air hoses to the engine was there. He bought a spray and took 50 TL of workmanship. They are also changing the parts that work to earn money, just to take it to the service.
08.05.2020 16:22 # 15
insatiable_
Check the air hoses of the LPG side of the thin hose coming out of the mixer. If it does not get air, it can be played from the ground and it will fit well.
08.05.2020 16:22 # 16
gurselgurel306gti
where exactly your vehicle has been cleaned, the problem is the same unfortunate.
08.05.2020 16:22 # 17
gurselgurel306gti
[QUOTE = serommm] My teacher had the same problem in my griffé. The master who made the air hoses going to the engine said what the blockage was. I think they take it to a familiar master. They don't just take it to the service, they also change the parts that work to earn money.

brother, what did they do with your vehicle, now the problem is over, how is it okay?
08.05.2020 16:22 # 18
mitatg
Hello seromm;
above mentioned & nbsp; malfunction started in my 98 model griff you will introduce me to your master. thanks
08.05.2020 16:22 # 19
maykil20
Hello friends, I had the same problem. When I gasped the moment, it stopped at 2000 cycles. It was falling slowly
after the writings, I inserted the idle valve with a beam, I wiped it with a rag and wiped it with the cloth & nbsp; I researched a new one, 70 TL & nbsp;
08.05.2020 16:22 # 20
maykil20
http: // www.parcayedek.com/18433-peugeot-106-rolanti-sensoru-16-96-hellux-hele390009.html
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”