306 gas pump is not receiving electricity ...

The other day I got into the car, I started the car, the car did not work. I opened the hood, removed the gas hose, and gasoline does not come. I thought the gas pump burned. I just disassembled and tried it by giving 12v outside. Then I plug it back in and it doesn't work. I connected a 12v lamp to the ends of the socket with the help of a cable, but the lamp did not work. so there is no electricity to the pump. I pressed the impact sensor or something and tried to run it again, there was no electricity to the pump. Where is the problem?

If your vehicle is working directly on the gas, the crank position sensor

I operate on gas by holding down the gas / petrol button. But when I try to run it directly on the petrol without pressing the button, the starter starts, but the engine does not start because gasoline does not come. Wouldn't it work on the lpg even if the problem was with the crank position sensor? yiğit4516 2014-08-11 01:36:12

No position sensor is commanding most things, the mechanic is controlling, does not give the engine the first movement, ie gasoline

When the engine was hot, I took the gas where the vehicle stopped, and the engine stopped. Experience on the go?

I just tried switching to gas 2 times while the vehicle is moving and stopping, I press the button but it did not switch to gasoline. When I tried it before, the button to switch to gasoline was working, but the car stopped because it did not pump gasoline. In other words, there is no transition to gasoline. I removed the relay and looked for energy in the socket, energized to the coil but not energized to its contacts. So there is trouble before the relay. yiğit4516 2014-08-14 22:19:02

No, I think the relay I looked at was the air conditioner relay. The gasoline relay was different. But I don't know where.