Peugeot Forums - Peugeot Fan Club

306 first starting problem

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 306
08.05.2020 16:41 # 1
blackeagle_1985

There is no problem in the start of my vehicle, the starter does not work, but when I want to leave the vehicle for 12 hours and start it again, it does not even sound like filling the injectors. I try again when it doesn't work on the first starter. I couldn't understand the reason, I waited for 11 hours, working, especially after 12 hours. Is there anything like this happening to you?

08.05.2020 16:41 # 2
tenten_52
pöfffff & nbsp; specializing in faults related to people & nbsp; "LOL"

< div> at the same time, when you go to the top industry, where did you find this car, you can't find the sister part of it, you can't make it look like a car with a blind knife. I'm going to sell it to the industrialists. >
08.05.2020 16:41 # 3
koliva
Sec. blackeagle_1985,

First of all, as our new friend has done,
http://forum.peugeotturkey.com/forum_posts.asp?TID=7516&title=new-yenin-denkatine-konu- read-to-read

Can you tell us more about your vehicle?
08.05.2020 16:41 # 4
blackeagle_1985
2001 model 306 platinum ... I had the Landi Renzo branded last system inline silent injector kit. Everyone says that immobilizer does it because it is not me. I am about to go crazy. This immobilizer is reading for up to 11 hours. I can't take it in when I don't have time ...
08.05.2020 16:41 # 5
koliva
[QUOTE = blackeagle_1985] 2001 model 306 platinum ... I had the Landi Renzo branded last system inline silent injector kit. Everyone says that immobilizer does it because it is not me. I am about to go crazy. This immobilizer is reading for up to 11 hours. I can't take it in when I don't have time ... [/ QUOTE]

If there is a problem with the immoblizer in the key, try the water chip. When your vehicle does not start after 12 hours, try to start your vehicle with your backup key, not the key you use. If it works, the problem is in the key, if it does not work elsewhere.
08.05.2020 16:41 # 6
blackeagle_1985
not only me, but nobody has seen such a problem ... no problem when I use my car with a spare key ... by the way, when I opened the remote, I saw that the immobilizer coal was shaking. I removed the coal and put it upside down and tried to get stuck in its socket. It works with it for now ... I think that when I put it in the ignition, the immobilizer inside it could not detect the coal when it shake. I believe that the problem of doing it in 12 hours is the memory of the vehicle, so that the key can be easily recognized, keeps it in memory for 12 hours. his task says to cut the gas pump. Fortunately, the problem has improved for now and if the same problem happens, I will copy the immobilizer coal again on the remote key and try it ...
08.05.2020 16:41 # 7
koliva
[QUOTE = blackeagle_1985] not only me, but no one has seen such a problem ... no problem when using my car with a spare key ... meanwhile, when I opened the remote, I saw that the immobilizer coal was shaking. I removed the coal and put it upside down and tried to get stuck in its socket. It works with it for now ... I think that when I put it in the ignition, the immobilizer inside it could not detect the coal when it shake. I believe that the problem of doing it in 12 hours is the memory of the vehicle, so that the key can be easily recognized, keeps it in memory for 12 hours. his task says to cut the gas pump. Fortunately, the problem has been fixed for now and if it is the same problem, I will copy the immobilizer coal again on the remote key and try it again ... [/ QUOTE]

I do not go over the door of the service that says that the immobilizer error will not start mars again
In my previous message, I said try it with a spare key. The problem is, as you mentioned, 100% immoblizer as you mentioned.
koliva 2012-04-09 12:38:29
08.05.2020 16:41 # 8
blackeagle_1985
sec. koliva thank you for your interest and interest ... hopefully the problem has improved :) now i asked a few key-makers 40 & nbsp; for immobiliser coal - They want 50 TL price, they give 150 to 175 price within the key switch construction, I called the service they say 200 + VAT, do you think the prices are normal? I think it would be better if I gave it to 175 keymakers and provided the original industry control code from the service :)))
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”