Dear friends. In my previous topics, I wrote that my right front door occasionally causes problems during locking. The problem was that when locking the doors from the remote, the right front door was not locked, throwing it back, and rarely did it. This Monday, I bought the right front door lock center from the particle, when I said to go to the locker, what should I encounter? The tail of the calf broke off after that. I did not respect the part of the piece and ran the track by myself. Yes, the lock is correct, but the socket location does not even greet with the old one. Of course, by the way, I opened the right door to the lockers for 2 times and I loved 10 TL. I said let me put the lock today while the door was dismantled, I watched the master, everything went well until the work came to the cable connection. The numbers of the old socket and the new cable socket are very different, which one of them is the engine and which switch cables are not clear. I disassembled my old door lock and firstly detected the tips from the engine ohm values with the avometer and applied the same process to the new door lock motor. There were 3 idle wires left, and I found them one by one, respectively, to blackboard. I made the door lock myself without any support from anyone with zero error. My dear friends, the reason I have explained this here for a long time is that I probably wrote that this might be useful when it comes to you, because it will help you, because it does not take the part, instead of buying it, I want to deal with it every step and electricians and lockers who are the masters in the market do not have any news ... I say I do not accept, I say that if you are a master, I will bill you .....
insomnia
Engin Tepe