|
|
|
|
3008 wiper arm fails to function |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 3008 (2009-2015) | |
| 08.05.2020 21:23 | # 1 |
 Burak0637 |
|
|
I have a 2010 model 3008 premium pack vehicle. The auto wiper operates 1 time when the vehicle is running. When I disable the automatic wiper with the wiper arm, after a few seconds, it switches back to automatic mode again, or the wiper arm and trip computer keys become completely dysfunctional. It does this in vague intervals. It does not come out when it is connected to the fault detection and it works without any problem when I show it to the master in every industry. Does anyone have a good adviser to recommend in Ankara or Ankara?
|
|
| 08.05.2020 21:23 | # 2 |
 omerb |
|
|
Hello, have you ever replaced the vehicle's headlight bulbs? |
|
| 08.05.2020 21:23 | # 3 |
| Burak0637 |
|
|
Hello, I have not changed. The headlight lamps are original. There is no Zenon
|
|
| 08.05.2020 21:23 | # 4 |
| omerb |
|
|
Burak bey, this problem is usually making HID bulbs. If your bulbs are original, they say there might be a problem with the wiper motor. It happened to someone. Passenger side took the wiper motor from the output and changed it. Their was working even when locking the vehicle. The simplest solution is this way.
|
|
| 08.05.2020 21:23 | # 5 |
 sonerkyl |
|
|
Welcome, Mr. Burak. I have never washed the car's engine recently. oxidation etc. in fuse box can. It is necessary to check the installation sockets. last chance there might be a problem with the headlight wiper arm. If you want to have a mas peugeot, you can take a look at the teacher.
|
|
| 08.05.2020 21:23 | # 6 |
| Burak0637 |
|
|
As far as I understand, one of the wiper motors is doing these kinds of problems. Thank you for your interest
|
|
| 08.05.2020 21:23 | # 7 |
| Burak0637 |
|
|
Welcome, Soner Bey, & nbsp; I have never had the engine washed, but it has been doing for about 4 years since I bought it. I don't know if they washed it before I got it. & Nbsp; Let me have the fuse boxes and wiring checked. Thank you for your interest 😊
|
|
| 08.05.2020 21:23 | # 8 |
 charchur7 |
|
|
Hello my teacher. Did you stop like catalog jewelry? I transfer the article that says it. The stop operation is performed manually by the driver by moving the control upwards and then returning it to the 0 position. The stop is accompanied by a message on the screen.
|
|
| 08.05.2020 21:23 | # 9 |
| Burak0637 |
|
|
I did it, hodja. After a certain time, it switches to automatic mode again. When I move the handle up again, it becomes dysfunctional. The road computer key on the tip of the wiper arm also becomes dysfunctional. Sometimes after 1 minute, sometimes after 5 minutes, the wiper arm and trip computer key become active.
|
|
| 08.05.2020 21:23 | # 10 |
| sonerkyl |
|
|
I still think there is a problem with the headlamp signal arm
|
|