Peugeot Forums - Peugeot Fan Club

3008 REINFORCED STEERING ESP FAILURE

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 3008 (2009-2015)
08.05.2020 19:29 # 1
ozgurkso
Hello friends, my 3008 1.6 vti vehicle was giving esp asr failure and reinforced steering failure warnings. The device was connected in a special peugeot service, it gave a malfunction like communication break. I think I have come across a lot of chronic problems on the internet. Please help me how can I solve this?
08.05.2020 19:29 # 2
xmen
I don't know what the reinforced steering fault is, but the esp fault can be caused by the winding inside the signal arm.
08.05.2020 19:29 # 3
ozgurkso
There are many complaints on the internet on the subject, if there is a friend who has experience in this matter, please help me.
08.05.2020 19:29 # 4
ozgurkso
I looked at the comments on the internet and changed the battery after the brake sensor. After 5-10 days, it again gave esp / handbrake malfunction.
08.05.2020 19:29 # 5
sonerkyl
My free teacher, I have read something like this, one of the abs sockets has fled the water, your friend has cleared up, he gave the same error after 2-3 days. You have replaced the battery brake sensor. I think a piece of water that has escaped or oxidized causes it.
08.05.2020 19:29 # 6
ozgurkso
Soner Bey, in my research, we talk about the brake sensor and the abs sensor after the battery, but it was thought that it would not be an abs sensor when the vehicle was standing in the light and not showing it on the fault tester. abs esp etc. without getting tired of the authorized service. I am afraid to change the brain and make 2000-3000 TL account and still not be solved.
08.05.2020 19:29 # 7
sonerkyl
Mr. Ozgur, my idea is to buy a contact spray, remove the socket on the wheels and clean it.
08.05.2020 19:29 # 8
ozgurkso
Thank you for your interest. I have an OBD device, but it does not show peugeot malfunctions. It gives a failure warning while the vehicle is stopping, but if you are talking about ABS cable sockets, I will try it.
08.05.2020 19:29 # 9
sonerkyl
Sensore looked like it wasn't hard to bite
08.05.2020 19:29 # 10
mehmets424
There was a Esp / Asr malfunction when connected to the device showed connection problem. A part was replaced where the signal arm was connected, and the problem was fixed. If any, I write.
Also, if there is a problem of head up opening, remove the indicator, there is something like a small screw on the back.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”