Peugeot Forums - Peugeot Fan Club

3008 door creak

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 3008 (2009-2015)
08.05.2020 18:53 # 1
Barbaros
There are 3008 I got zero in 2012, very pleased except a few things
Especially the lags and squeaks coming from the left side of the console and through the door that cooled me from my car, which I wore recently (especially on Egyptian asphalt roads)
I sprayed silicone spray, of course, was the workaround. I don't want to change the car if we can cut the door creak, it's a complete family car.
Please do you apply it to the wick about door creaking or do you have such problems "...........
08.05.2020 18:53 # 2
pusutr
There are friends who apply vaseline to the suppositories. Especially in cold seasons ..
19.10.2020 14:28 # 3
cnrozn
[QUOTE = Barbaros] I bought zero in 2012, I have 3008, I am very pleased, except for a few things. Especially the creaking and creaking coming from the left side of the console and the door (especially on Egyptian asphalt roads), which cools me out of my car, which I recently plugged in. I don't want to change the car if we can cut it is a complete family car Please how did you apply it to the wicks about the door squeak or do you have such problems? I bought a 2012 model 3008 a week ago. There was a noise when the driver opened and closed the door. I bought this on purpose because it was insignificant. Yesterday I had the opportunity to take care of it. I opened the door and squeezed the wd-40 to penetrate the tensioner and opened and closed the door for 1-2 minutes. I tightened the nut with the socket wrench. At that moment the sound was coming again, but today the sound stopped. I don't know where it goes. cnrozn2020-10-19 18:00:38
19.10.2020 21:08 # 4
GokhaN
[QUOTE = cnrozn] [QUOTE = Barbaros] I bought zero 3008 in 2012, I am very pleased, except for a few things. Especially the creaking and squeaking from the left side of the console and the door (especially on Egyptian asphalt roads), which cools me out of my car recently, I sprayed silicone spray. There was a workaround. If we can cut the door creak, I don't want to change the car. It's a complete family car Please how did you apply the wicks for the door squeak or do you have such problems? ”........... [/ QUOTE] It's a very old topic but new I bought a 2012 model 3008 a week ago. There was a noise while opening and closing the driver's door. I bought this on purpose because it was insignificant. Yesterday I had the opportunity to take care of it. I opened the door and squeezed the wd-40 to penetrate the tensioner and opened the door for 1-2 minutes Then I tightened the nut with a number 10 socket wrench. At that moment the sound was coming again, but today the sound stopped. I don't know where it goes. [/ QUOTE] Replace the door tensioner, it's not a very expensive item
25.10.2020 00:06 # 5
cnrozn
[QUOTE = GökhaN] [QUOTE = cnrozn] [QUOTE = Barbaros] I got zero in 2012, I have 3008, I am very pleased, except for a few things. ) I sprayed silicone spray, of course, it was a temporary solution. If we can cut the door creak, I do not want to change the car. It is a complete family car Please, how did you apply the wicks for the door squeak or do you have such problems? It is an old issue but I did not want to open a new topic. 1 week ago I bought a 2012 model 3008. There was a noise when opening and closing the driver's door. I bought this on purpose because it was insignificant. I turned it on and off for 1-2 minutes. Then I tightened the nut with a number 10 socket wrench. At that moment the sound was heard again, but today the sound stopped. I don't know where it will go. [/ QUOTE] If it sounds, you can directly replace the door tensioner. Not a very expensive item [/ QUOTE] Thank you. There is no sound yet. The vehicle will be a lining disc replacement, let's add that.
26.10.2020 14:49 # 6
mavibere
I hope you use the vehicle in good days. I am thinking of buying 2011 - 2012 3008, but can I get your and other friends' opinions? There are also people who say it is especially problematic with the transmission, and there are others who are very satisfied.
28.10.2020 09:05 # 7
sonerkyl
[QUOTE = cnrozn] [QUOTE = GökhaN] [QUOTE = cnrozn] [QUOTE = Barbaros] I got zero in 2012 I got 3008, I am very pleased, except for a few things. (especially on Egyptian asphalt roads) I sprayed silicone spray, of course, it was a temporary solution. If we can cut the door creak, I do not want to change the car, it is a complete family car. [/ QUOTE] It is a very old subject but I did not want to open a new topic. 1 week ago I bought a 2012 model 3008. There was a noise when the driver opened and closed the door. I bought this on purpose because it was unimportant. -40 I tightened it and I opened and closed the door for 1-2 minutes. Then I tightened the nut with a number 10 socket wrench. At that moment the sound was coming again, but today the sound stopped. I don't know where it goes. [/ QUOTE] the original disk is very expensive. For example, I have never bought an original for all my vehicles and have not been in trouble. I used disk delphi-trw-boch-feredo as a brand, it was not a problem- I used trw-4u-delphi as a lining and I was satisfied with all of them. good luck for the vehicle, if there is a sound again, you can directly change the door tensioner. There is no sound yet. The vehicle will be a lining disc replacement, let's add that. [/ QUOTE]
29.10.2020 21:19 # 8
cnrozn
[QUOTE = BlueBere] I hope you can use the vehicle in good days. I'm thinking of buying 2011 - 2012 3008, but can I get your and other friends' views? There are also people who say it is especially problematic with the transmission. [/ QUOTE] Thank you. I hope you find it according to your heart. It would be a little early for me to comment completely on satisfaction. The gearbox is not engineering wonder like dsg edc in my opinion, but it is not as complicated as them. There is a clutter in gear shifts, yes, but as I read on the forum, it is not felt if you take your foot off the gas. For now, I'm glad I switched from a manual car and it was my first automatic gearbox. I hope it will be like this.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”