208 malfunction lamp

Good for everyone, my car 2012 model pevgeot 208 1.4 hdi has been flashing the malfunction lamp occasionally for the last 6 months. I think he burned it because of dpf when he searched a bit on the internet It did not burn about 200 km when it used a little speed, but today it burned again, and I do not want to use a continuous speed (like using a 1 gear low) as well as a very burning car. 2 km between my house and my work and in the city, I go to E5 once a week as a requirement of my job, then I have to go low gear (2 thousand 2500 cycles) so that the dpf is not blocked

[QUOTE = emrahi] Good forum for all, my car 2012 model pevgeot 208 1.4 hdi has been flashing the malfunction lamp occasionally for the last 6 months. I think he burned it because of dpf when he searched a bit on the internet It did not burn about 200 km when it used a little speed, but today it burned again, and I do not want to use a continuous speed (like using a 1 gear low) as well as a very burning car. 2 km between my house and my work and in the city, I go to E5 once a week as a requirement of my job, then I have to go low gear (2 thousand 2500 cycles) so that the dpf is not blocked [/ QUOTE]

Hello there,

I have my own master close to the industrial industry in the Anatolian side of Istanbul. There may be differences between the sites. Our site is used more like databank.

My brother Gokhan put his finger at the exact point and it was more like our forum data bank. I think your problem is because of the constant short distance, my teacher stops the car from warming up, this causes dpf blocking. I, my friend, i20 2015 model 55 thousand tenths, it is a problem like you. It turns on every 3-4 months :) Use 1 or 3 speeds in 1 gear.

I'm not on the Anatolian side, teacher, I'm in Esenyurt :))

Yesterday, when I was running at 5pm, I took the malfunction lamp and exclamation mark engine malfunction lamp to the industry in the morning when I gave a service warning. The malfunction codes p12b4, p2563, p1496 came out, my master said that these are pevgeot chronic problem (can go up to turbo replacement) and told me to go to the service, I went to the service and explained the situation, the service clearly said "we don't have a chronic problem" and came out after a little discussion, they even want 200 TL to connect to the device ...

emrah brother

Listen to me now, my friends, I have been dealing with the same fault for 3 weeks. I didn't solve the problem I did not go. At the end of the day, I solved the problem when I connected it to the computer. I searched, I found out that it is an electrovan, I went today, I was conqueror Fatih Peugeot Peugeot from my own service I got an electrovan, I went to 80 tly, it was a bit difficult, but if you have the stuff, then I realized the traction of the car and now there is no problem at all. she. You can contact me for the question, good evening

Thank you for the answers, my friends, the owner of the previous one has also changed the electrovan at 41 thousand in the authorized service in Izmir, 57 thousand again, this malfunction has appeared, and then the gentleman in the service says that we have no chronic problems. Changing parts in the service should be guaranteed.

Change it again, I think my brother is 54 thousand in my car, I think this is 208 and even my traction has increased. tolga0606 2018-03-29 11:52:44

There is no warranty guarantee :) I will take the part and replace the malfunction lamp closely, that's my intention. Thank you for your help

Let me make an update on the subject, friends, 470 km is not burning, it has been 1 month. In other words, particle cleaning was done with a computer, I wrote in detail above, after that the light did not come on. Is the particle filter obstruction pain hitting the solenoid valve: D emrah is 2018-04-28 01:34:07

now I have the same event in me pejo 208 2012 model 52bin error codes 1496 and 2563 electrovanami change

Do you have the code of the piece?

[QUOTE = Cemeren38] now I have the same event in me pejo 208 2012 model 52bin error codes 1496 and 2563 electrovanami change [/ QUOTE]

yesterday i ordered the solenoid yesterday, i will inform you about the result today or tomorrow.

[QUOTE = Cemeren38] now I have the same event in me pejo 208 2012 model 52bin error codes 1496 and 2563 electrovanami change [/ QUOTE]

After replacing the solenoid valve, the lamp lights up again 250 km, it goes out, and it is attached according to its head. Also on the ramps sometimes the car does not go after 120 125 (sometimes). He doesn't do it on the straight road, sometimes he doesn't do it on the ramp either. I have a traction problem even if the lamp is off (on ramps, sometimes). Recently I went 750 km long road, the air conditioner turned on, lit 4.8 liters at 120 125km constant speeds, fuel consumption is also good. Oil pattern has become more than 2 thousand km mobile 5 30 esp, diesel, oil, pollen, air filters have always been original, and the valve has been original. I always get the diesel pattern shell from there, I don't understand, I'm a meticulous man, this lamp bothered me a lot, the car in 60 thousand. Nowadays, I go to and from Istanbul all the time, not a short distance, I think it is not a blockage of dpf.

Mr. Emrah,