|
|
|
|
208 automatic diesel, Cruise Problem |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 208 | |
| 08.05.2020 21:05 | # 1 |
 Burk37 |
|
|
Car model; 2015 diesel automatic 208 active package. The vehicle has speed limiter and cruise control. I just bought the car, the former owner does not know if it is defective because the cruise control never uses it. I have been dealing for 3 days, I couldn't get it to work, I made the manual. In that; I accelerate at a speed of 40 min, I switch to cruise mode. The phrase "cruise sign + PAUSE" is on. As I said in the guide, I press the + or - keys when 50 60 is the speed I want, but the 2 lines + PAUSE light is blinking. Cruise ON light does not come on and does not activate. When you open a cruise at lower speeds and press + or - the speed is too low for cruise. At high speeds, Cruise two lines + PAUSE are blinking. I wonder if the system is faulty or I couldn't do it. There is no other extra information in the user manual. Thanks in advance to anyone who has used or helped before.
|
|
| 08.05.2020 21:05 | # 2 |
| Ufuk_64 |
|
|
The gear will be at least 4.
|
|
| 08.05.2020 21:05 | # 3 |
| Ufuk_64 |
|
|
I missed that there is Ato gear, tried over 70 km.
|
|
| 08.05.2020 21:05 | # 4 |
| Burk37 |
|
|
Thanks for your quick response. Yes, I tried over 70km. It still did not happen. He already said 40km and over in the book. I am thinking of trying on the highway tomorrow. I hope it is not broken. Also; I do not know if it is normal but in case of ON or PAUSE I could never substitute km instead of those two lines. So I know I can't activate it when the car is stopping or driving at low speed, but I couldn't even set the km speed setting.
|
|
| 08.05.2020 21:05 | # 5 |
| Ufuk_64 |
|
|
It is not broken, I had difficulties for the first time. In the middle of the arm, you can see what it says. If you want to go 70 km and above, there are 2 keys under the arm, one sign corresponds to the middle finger, then press the button on the index finger once, or there is a button on the arm (the horn is stolen from there), press it once, then press the throttle, if it is a function, pause If it does not show the speed fixed at the post, it is necessary to find someone who knows. It is necessary to pay attention to it, especially if there are both cruise control and limit. Good luck with
|
|
| 08.05.2020 21:05 | # 6 |
| Burk37 |
|
|
I tried them all, obviously, there was no way to write ON instead of PAUSE, the cruise was not activated, or there wasn't any km out of its ax ... For example, 62km + PAUSE light did not light up. Whatever I do, Cruise sign, Two lines and PAUSE are blinking. The speed limiter and the speed stabilizer's cursors are different and I have noticed that I do not accidentally limit them. The button, which is like a horn, serves to turn it on and off for a short time, and I tried to press it. So as I tried almost everything; I made a 70, open a cruise and hit the + I made 70, open a cruise and pressed - I made the 70's and opened the cruise and pressed the button to open and close that end In all, the result is the same, instead of typing CRUISE ON, the word Cruise PAUSE flashed with 2 lines. There's no miles When the car stopped, I tried to set the km for the cruise, it didn't even happen. Be it PAUSE, but you would have set some miles, it didn't even happen. I think I'll have to play a little on the highway tomorrow and go to the service
|
|
| 08.05.2020 21:05 | # 7 |
| Burk37 |
|
|
https://youtu.be/v7pidz4wh3k This is his video. I pressed the start buttons +, - and at the end separately. Only PAUSE is flashing It never turns ON. Once in a while, I opened the speed limiter limiter, it works, the cursor is different, it does not interfere. But I couldn't run cruise control. |
|
| 08.05.2020 21:05 | # 8 |
 emrahi |
|
|
So it is not that difficult to turn on or activate cruise control, if you have not worked so hard, it is probably corrupt. Also, the former owner of the 2015 model vehicle never seemed convincing. Where are you on Istanbul? Around Beylikdüzü, the master I had gotten to be able to help, at least he tries with a solid arm, diagnoses where the problem is.
|
|
| 08.05.2020 21:05 | # 9 |
 sonerkyl |
|
|
it is possible that the faulty teacher must be connected to the fault detection device. Usually the problem is either from the arm or from the brake sensor.
|
|
| 08.05.2020 21:05 | # 10 |
| Burk37 |
|
|
Finally I took it to the service. The car slept for 2 days but resolved. I don't know the source of the problem, neither do you, comic. At first they guessed from the brake seal and changed it, but it was not resolved. They finally threw the appropriate software back into the brain of the car and it was resolved. They said that although I had all the maintenance done at the authorized service until now, the software in it has changed. I paid a fee of 100TL but it was finally resolved.
|
|
| 08.05.2020 21:05 | # 11 |
| emrahi |
|
|
[QUOTE = Burk37] I finally took it to the service. The car slept for 2 days but resolved. I don't know the source of the problem, neither do you, comic. At first they guessed from the brake seal and changed it, but it was not resolved. They finally threw the appropriate software back into the brain of the car and it was resolved. They said that although I had all the maintenance done at the authorized service until now, the software in it has changed. I paid 100tl, but finally it was done. [/ QUOTE] If you have done 100 lira in the service, it is very good, get well soon, use bye :)
|
|
| 08.05.2020 21:05 | # 12 |
| sonerkyl |
|
|
I am glad that your problem has been resolved, teacher, thanks in return.
|
|