207 stop

1. Hello everyone, I just joined you, my problem is the 2009 model peugeot 207 is stopping on the way, can you help me.

Is the vehicle lpgli?

1.4 hdi

You have made a very wide expression, my friend ... if you tell me more in detail, maybe we can get bids in our minds.

low oil pressure on the screen, exhaust emission is defective, sometimes it does not write again, it stops again 2 months once in 2 months, yesterday stopped 10 times in 1 hour yesterday

First of all, the most suitable one is to connect the car to the computer. It should be looked at according to the fault codes. But based on my experience, the engine fuse box problem I have said. The vehicle stops because it does not transmit the voltage properly. The oil lamp is burned with the oil lamp in the same way.

roughly how much it costs

it may cost a little bit.

thank you

Hello, the same problem exists in my vehicle. Did you handle it?

[QUOTE = hamzabilal] hello the same problem is in my car did you handle it? [/ QUOTE]

hobby, sir, thanks. We did not make them look at the brain, I did not see them. Our fault codes on the device give u1308 and u 1108. It says that there is no connection between the abs and the motor brain, meanwhile, we changed the crank speed sensor and we did not get any results.
He did not always stop at the stop, after about 200 km.

hocam check the abs sockets i say engine washing or something was done in the car or the car was made electrical parts such as extra sound system yad xenon.

I had the LED headlights installed on the vehicle but it was stopping before. The engine was washed before it said that I checked the sockets and cables master before now.

the fuse box has changed in my vehicle and the abs computer sockets have also been checked for the threat. Let's see if the malfunction will be repeated? do you have any other advice

Hello, can I find out how much you paid for these transactions?

friends 1.4 hdi 207 my car has the same problem, it is not clear when it will be done suddenly the exhaust emission system stops by saying that the defective oil pressure is low. Who encountered the same problem and solved it?