|
|
|
|
207 Sounds while the door is closing |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 207 | |
| 08.05.2020 20:30 | # 1 |
 KILIC |
|
|
|
|
| 08.05.2020 20:30 | # 2 |
 sonerkyl |
|
|
Brother, you need to have the door insulated, those sounds come from the interior trim parts, especially when the glass is open. It will be better if you insulate bituself on the inside. serum will restore the work again in a short time. Wrap some electric bands against the door buffer on the pole and make the room sound full.
|
|
| 08.05.2020 20:30 | # 3 |
 OguzhanKucuk61 |
|
|
[QUOTE = sonerkyl] brother, you need to have the door insulated, those sounds come from the interior trim parts, especially when the window is open. It will be better if you insulate bituself on the inside. serum will restore the work again in a short time. Wrap some electrical tape against the door buffer on the pole and make the room sound full. [/ QUOTE] I came to suggest the electrical tape  I wrapped it with electrical tape, and at the bottom I put a slightly sweet hard sponge in its size. The doors are closing pretty well. However, as Soner says, the door closes as if the windows are open while the windows are open. |
|
| 08.05.2020 20:30 | # 4 |
| KILIC |
|
|
I tried the electrical tape, but immediately turned it off and torn in pain :)
|
|
| 08.05.2020 20:30 | # 5 |
 maximusti |
|
|
I don't know about serum tubing, but, Isolation must be done for full sound. plus it's really useful for not getting sound from outside. I also think of starting from the trunk and making it to the front and rear doors. when the woofer hits a little, the doors make a rich sound :) I've added two video examples below. I was looking for a sound system. It can hold a little too much in price. I recommend isolation material Local Erkurt brand for him. we glue the insulation insulation material to the lower part, and we paste the sponge material called 1 layer bitusef on it. [TUBE] qpuıyx_bgn A [/ TUBE] [TUBE] vrd46kdjwf the & t = 404s [/ TUBE] |
|
| 08.05.2020 20:30 | # 6 |
 boruc |
|
|
I applied aquarium hose and electrical tape to ten doors of my 206 vehicles  If there is little, it works, but you don't have much expectation. |
|
| 08.05.2020 20:30 | # 7 |
| KILIC |
|
|
[QUOTE = maximusti] I don't know about serum tubing but, Isolation must be done for full sound. plus it's really useful for not getting sound from outside. I also think of starting from the trunk and making it to the front and rear doors. when the woofer hits a little, the doors make a rich sound :) I've added two video examples below. I was looking for a sound system. It can hold a little too much in price. I recommend isolation material Local Erkurt brand for him. we glue the insulation insulation material to the lower part, and we paste the sponge material called 1 layer bitusef on it. [TUBE] qpuıyx_bgn A [/ TUBE] [TUBE] vrd46kdjwf the & t = 404s [/ TUBE] [/ QUOTE] I do not want to dismantle the doors, but I guess this is going to be an application in the forum, I think I had friends doing this in the forum. I feel like I'm going to do it now :)
|
|
| 08.05.2020 20:30 | # 8 |
 onlycihan |
|
|
in https://forum.peugeotturkey.com/forum_posts.asp?tıd=43424&pn=2&title=206-aracim-su-ic I removed the doors for the solution of the water problem in terms of ideas.
|
|
| 08.05.2020 20:30 | # 9 |
| OguzhanKucuk61 |
|
|
I wonder what is the cost? And how many kg will this material weigh?
|
|
| 08.05.2020 20:30 | # 10 |
| maximusti |
|
|
[QUOTE = SWORD] I do not want to dismantle the doors, but I guess this is going to be an application in the forum, I think I had friends doing this in the forum. I feel like I'm going to do it now :) [/ QUOTE] I had already removed the doors for installation. but I will be obliged to be disturbed by the noise soon before the weather gets cold. |
|
| 08.05.2020 20:30 | # 11 |
| onlycihan |
|
|
These materials do not hold even 5 kilos. It is very important to stick the original insulation inside the door in the same way, otherwise there is a water intake problem and I tried very hard to solve that work.
|
|
| 08.05.2020 20:30 | # 12 |
| KILIC |
|
|
Guys, I'm selling the car, but this door thing never left me. Finally, I made the sound event unfortunately, it came to my mind to take a photo later. There wasn't a full sound when we closed the door, and weird sounds were heard. I removed the door face and carefully removed the insulation material. There was a material like silicone between the pole inside the door and the door sheet. I filled again with the black cyclone. Now the door is closing very nicely.
|
|