207 pointless problems.

When we open the doors, the wipers return from the bad position to the correct position. While the vehicle is working, everything gets better, but the problem arises after locking the vehicle while it is parked.

& nbsp; I disassembled all the sockets as a chassis mi aliyo. I disassembled the brain and put it on again The problem was not resolved by cleaning and checking the sockets. Sometimes it continues all the time. Sometimes he keeps doing it once. & Nbsp; I shot his video

Also at 5.30 a.m. last night While the headlights were flashing, the wipers clicked step by step, repeating without stopping like crazy. Maybe he flashed like that until morning. I opened the ignition when I woke up and it improved ..

It's happening right at your fault. You have to go to a very good electrician.

The problem is already after the battery replacement. When that relay is activated, voltage goes to your headlights and wipers.

It is normal for the wipers to return to their normal position when they open the door. It will be so.

I think you did not short circuit while installing the battery. He says the vehicle is already an electrical nuisance.

If the problem is after the battery, check a battery. If available, install another battery. Or install the old battery. Remember what you did back and forth to the cause of the problem.

It's happening right at your fault. You have to go to a very good electrician.

The problem is already after the battery replacement. When that relay is activated, voltage goes to your headlights and wipers.

It is normal for the wipers to return to their normal position when they open the door. It will be so.

I think you did not short circuit while installing the battery. He says the vehicle is already an electrical nuisance.

If the problem is after the battery, check a battery. If available, install another battery. Or install the old battery. Remember what you did back and forth to the cause of the problem.

When I installed the new battery, I shortly mined the plus and minus yes. I think it happened after that. that is, a mischief. What happened in the video was happening, so once and then the normal way tool. But when I wake up one night, it repeats the same movement without interruption. Looking at the vehicle from the road. I put the positive end of the battery and leave it now. If I go to the brainworm, I am an electronic worker. That's why I was so tired of it. There was a short circuit from thoughtfulness when connecting cables, so it was instant.

it gets better when it opens the door. or if you open the key with a remote key or open the contact, there is no problem when using the tool. when I put it to sleep then the virus wakes up: =

Yes, teacher, I smashed the fuse box, I was a complete act. it is not possible, but we still have to look. I checked and cleaned all the sockets one by one with alcohol. I inserted the wiper and headlight fuses. At this time, the roles are throwing, the wipers stop, but the roles will fail.

Yes, my teacher placed the LPG on it. I liked the answers to the subject very much because you drew attention to the right places. The LPG connection and the cables on the engine are not positioned. they were affected by the heat. and I noticed the presentation. When placing the lpg cables to the left and right, the virus is activated again. so when I move those cables, that malfunction starts. sometimes it fits when I play with the cables in the fuse box. Somewhere there is a contactless cable or a trigger trigger. I can not find.

The rectangular iron piece with lpg cables attached was left clicking on the engine, not even connected, vibrating. I fixed it over there with a cable tie and insulated under it

If you can't see a problem, the electricity coming into the lpg kit will be completely removed. Both - and + ends. So I think you will check the lpg system. You will continue according to the result.

There is also a case like this. I put the led in place of the parking light bulb, it lights up slightly with the ignition off. it does not light when the bulb is attached. LEDs light up very light, so there is 1-2 volts there. I put the LED on the 3rd boards then I realized it might be a normal thing. I was skeptical that there was a leg somewhere now

The resistance of the halogen bulbs is high, therefore small leaks do not have an effect on the halogen. It causes slight burning in leds. I think more playing with that car. First fix this problem. Then make led med :)))

bottomless led my own production 4x3volt = 12v led square made with serial connection 5 pcs. lined up on the rear window taillight. I made blue color on the front parks, it is very beautiful. It was for trial purposes. I will use the original bulbs again. leds are on as you know. I think there are 2 volts in the light. led med was totally curious :)

Okay, yes, you need to follow the path from that relay patiently. sometimes I want to renew the cable harness completely.

I can look at the weekend again, I can not look again. this is the fault. malfunction or not like. flashes regularly, wipers go and go regularly. click on the role. have you met such a bike in peugeot

My brain is most likely caused by the brain or fuse box. If you have a friend who can try 207 gasoline vehicles in Bursa and try his brain. I just have to put this piece on and see if it does the same thing. I say I should buy a brain for him. If I go to the brain repairer I know, it is probably in the hands of the man. the brain of the vehicle is called the metal brain. In the third picture, they wrote the box as a brain as a brain in sales. which brain is confused now. Does anyone know which software is being used?

https://youtu.be/qqwhznghqw4