|
|
|
|
206 zero engine HELP! |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 21:25 | # 1 |
 61ACD486 |
|
|
|
|
| 08.05.2020 21:25 | # 2 |
 sonerkyl |
|
|
Have your turbo solenoid valves checked, hodja. or the part is faulty. sometimes they attach their hoses upside down, which may be due to it. |
|
| 08.05.2020 21:25 | # 3 |
| 61ACD486 |
|
|
While the engine of the vehicle is being built, zero is taken and inserted in the turbo.
|
|
| 08.05.2020 21:25 | # 4 |
 omerb |
|
|
My teacher, have a great past. Have you connected the vehicle to the device and checked for failure.? This may be the cause of the problem you are talking about. Is there a malfunction code.?
|
|
| 08.05.2020 21:25 | # 5 |
| 61ACD486 |
|
|
My master writes anger, but I just changed as a supplier industry, could this be the reason
|
|
| 08.05.2020 21:25 | # 6 |
| omerb |
|
|
Glow plug is important in diesel. Otherwise, there will be no efficient burning. Does the motor return to normal when it gets hot? Or are you waiting for it to warm up. Try this. If it returns to normal when it gets hot, this is the spark plug. It causes it to run late in the cold or not to work at all. Also does the spark plug work? You have to watch him.
|
|
| 08.05.2020 21:25 | # 7 |
 ukayl |
|
|
[QUOTE = 61ACD486] Friends 206 hdi, I have a zero engine built in. The vehicle does not pass 3000 cycles. How many costs did my teacher have engine and how many kms of engine needed?
|
|
| 08.05.2020 21:25 | # 8 |
| 61ACD486 |
|
|
If my master goes 6 so long. The vehicle was running normally this morning, 5 minutes later, 3k cycles were not over.
|
|
| 08.05.2020 21:25 | # 9 |
| sonerkyl |
|
|
I think the turbo doesn't take vacuum, sir.
|
|
| 08.05.2020 21:25 | # 10 |
| ukayl |
|
|
Hodja, I asked something, but I would be glad if you can answer. |
|