Peugeot Forums - Peugeot Fan Club

206 XT 2002 model 8V or 16V

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 15:24 # 1
ose
I don't know how many valves my vehicle has.
08.05.2020 15:24 # 2
Guests
16V ...
Those with 8V should have finished in 2000
The top of the 16V motors is completely black plastic. The spark plug in the middle is the cover of the bob. The valve cover of the 8V ones is metal ...
the cecol 2011-05-08 23:20:53
08.05.2020 15:24 # 3
106_arts
All 2002 models are 16 valves 110hp
08.05.2020 15:24 # 4
106_arts
1.6 16v
08.05.2020 15:24 # 5
ose
Meanwhile my car is 1.4 petrol top cap metal. The licensee that I received is 40.4 kW, or 54 hp, and said 90 hp. I realized after kw on the license
08.05.2020 15:24 # 6
ose
[QUOTE = kankam_743] I don't know how many valves my vehicle has. [/ QUOTE]
Meanwhile my car is 1.4 petrol top cap metal. The licensee that I received is 40.4 kW, or 54 hp, and said 90 hp. I realized after kw on the license. thanks for the picture
08.05.2020 15:24 # 7
Guests
if the engine is top metal then the only option is 1.4 8V 75 hp :))
Even if it is 16V at 1.4, the valve cover is plastic.
08.05.2020 15:24 # 8
dinoco
definitely not 8v friends 16v
08.05.2020 15:24 # 9
dinoco
that is, not from the engine above (in the picture)
08.05.2020 15:24 # 10
ose
[QUOTE = dinoco] ie not from the above engine (in the picture) [/ QUOTE]
yes not. Well, isn't that plastic?
08.05.2020 15:24 # 11
Guests
[QUOTE = kankam_743] [QUOTE = dinoco] ie not from the above engine (in the picture) [/ QUOTE]
yes not. Well, isn't this plastic coming out? [/ QUOTE]
We are not talking about the protection cover on the motor.
If you pay attention to the picture above, it doesn't have the protection cover that you mentioned. The edges of the upper plastic that you have seen are the valve cover. In the middle is the plug of the spark plug-bob. But in your engine, we said the valve cover metal on the back of us. the spark plugs come from behind and have 4 bobbins at the top ... there is a single 4-wire square socket in the middle of the coil.
Valve caps of 16V motors are generally plastic.
08.05.2020 15:24 # 12
ose
[QUOTE = kankam_743] [QUOTE = dinoco] ie not from the above engine (in the picture) [/ QUOTE]
yes not. Well, isn't this plastic coming out? [/ QUOTE]
or rather, if the plastic was broken, might they have taken it off?
08.05.2020 15:24 # 13
ose
[QUOTE = CeCoLi] [QUOTE = kankam_743] [QUOTE = dinoco] ie not from the above engine (in the picture) [/ QUOTE]
yes not. Well, isn't this plastic coming out? [/ QUOTE]
We are not talking about the protection cover on the motor.
If you pay attention to the picture above, it doesn't have the protection cover that you mentioned. The edges of the upper plastic that you have seen are the valve cover. In the middle is the plug of the spark plug-bob. But in your engine, we said the valve cover metal on the back of us. the spark plugs come from behind and have 4 bobbins at the top ... there is a single 4-wire square socket in the middle of the coil.
Valve caps of 16V motors are generally plastic.
[/ QUOTE]
I understood okey I said a die that is adjacent to the top cover
08.05.2020 15:24 # 14
dinoco
no friend CAR 8 (EIGHT) valve oketoo :)
08.05.2020 15:24 # 15
Guests
Has been detected confirmed :))
1.4 8V 75bg: DDDDDDDDDDDDDd
08.05.2020 15:24 # 16
ose

thank you for your answers.

08.05.2020 15:24 # 17
Guests
[QUOTE = kankam_743]

thank you for your answers.

[/ QUOTE]
After the thank you, you will write the necessary information instead of the question mark in the water. Göz Kırpma
08.05.2020 15:24 # 18
ose
Sırıtma
08.05.2020 15:24 # 19
ose
[QUOTE = cecol a] [QUOTE = kankam_743]

thank you for your answers.

[/ QUOTE]
After the thank you, you will write the necessary information instead of the question mark in the water. Göz Kırpma
[/ QUOTE]
ok, i am correcting do not be angry Gülme
08.05.2020 15:24 # 20
Guests
just remind me what is angry :)) just: DD
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”