206 X Line Front Fog and Bumper - Modification and Tuning Information

I started to start the front fog event for 206 X Line.

* While my friend was looking for a piece for himself, the front bumper looked at me in the puzzle, but the name of the publisher was not the price at all. Paint will be required even if it is the same color.

* I decided to buy a new bumper. Can I remove the front grille from the front bumper, etc. Is it okay to take it blank?

* What do you think I need to pay attention to when painting the bumper? Or is there a place that you can recommend on the European side in Istanbul that is both knowledgeable and reasonable. There was a painter I knew before, but what is the reason? I will paint the bumper completely, I will paint it on the rear bumper.

* I think that I can remove and install the front bumper myself.

* I will consult one more thing and connect the front fog to the console with a separate button. because it's not original

* What is the paint code in the picture I added below?

Thanks

1- The publishers, unfortunately, my teacher is no longer suitable as before. As you said, you will need all kinds of paint.

If you say why 2-full price will be appropriate, you will get 120 TL empty fog fog lamp, my teacher will keep 50-60 TL, worst 170 TL, if you give 20 TL more, you can stop or sell the other buffer spare.

3-There is no need to pay attention to the paint whilst you are a good master. your master didn't want to deal with it a little bit

You can remove 4-front bumper by yourself. There are many videos on youtube. they just want 100 TL for bumper removal.

You can use 5-valla as originally, do not have a fuse that will be connected with pp2000 from the arm and be replaced first in the motor fuse box. some models only have a fuse, but no role, in others no fuse. others do not have a role, and do not have a fuse, and some do not. Let's add the photo of the engine fuse box.

6-There is no problem, you can connect it in the important rear fog whether it works or not.

7-KMFD paint code brother.

If the vehicle does not have the necessary wiring for the fog lights, I would recommend that you operate the fog with a separate wiring, relay and button. I recommend cutting it to reduce the cost.If the bumper in your hand is original and intact, cutting can be done.

look I forgot her @ samet206 thanks for reminding. Clap

[QUOTE = doganatak] Hi

I started to start the front fog event for 206 X Line.

* I decided to buy a new bumper. Can I remove the front grille from the front bumper, etc. Is it okay to take it blank? [/ QUOTE]

You can buy and install the GTi bumper from the Peugeot market. Do not buy it alone, the quality of fog lights is very bad. Get a bumper + grill + tank fog light. It is the closest brand to the original.

[QUOTE = doganatak] * What do you think I need to pay attention to when painting the bumper? Or is there a place that you can recommend on the European side in Istanbul that is both knowledgeable and reasonable. There was a painter I knew before, but what is the reason? I will paint the bumper completely, I will paint it on the rear bumper. [/ QUOTE]

Why are you mixing up with others? If you will enjoy the car when you look at it, paint it. I, too, including the generations I had painted, which I never regretted. In the belts at the doors are black, paint them too :) You can use it with a nice oven paint without any problem. Just do not hold pressurized water too closely. [/ QUOTE]

[QUOTE = doganatak] * I will consult one more thing and I will connect the front fog to the console with a separate button. not original [/ QUOTE]

As Soner brother said, you can activate the front fog feature with the pp2000 program. I think that 90% fog installation is available, you only need to install and activate the fog. If you don't have it, you can do it with an external button, but don't pull it out of the back fog. Then the front fog does not turn on without turning on the rear fog, and the rear fog lamp is turned on for people coming behind you. Every time I come across, I count, swear, open the lengths and go behind.

Thanks friends

That was the fuse you asked @sonerkyl @ fusebox?

doganatak 2017-02-15 09:00:10

@doganatak teacher, the number 6 part in the upper right is the location of the fog light fuse. needs to be installed.

[QUOTE = sonerkyl] @doganatak teacher is the part number 6 in the upper right, is the location of the fog light fuse, is there any fog light installation? If you could look under the bumper, you will plug it into 15a fuse and activate it with pp2000. There is room for the lady to be installed in the role. [/ QUOTE]

it came to my mind to look under the bumper, but the place where I left the car in the workplace was wet I couldn't look but I will look Thumbs Up

All right, there is a plumber, probably the only job is to activate the fog and install and control the fuse.

[QUOTE = sonerkyl] okay my teacher has a plumbing probably only one job is to activate the fog and check and install the fuse, hopefully it will burn, or as I said, the fuse box needs to be placed in the role for someone who knows this job should do it for someone who does not know a little risky operation [/ QUOTE]

Anyway, someone who does not understand work is equivalent to my luck. Anyone who has software to do PP2000 activation, right? Well, let's assume there is no relay or something, I activated the fog, but I pulled the cable relay, etc., outside the fog, and got it connected.

The peugeot planet program master has to open it, of course, all of them are using it just to look at the fault code. It is no problem for pp2000 to remain active, as a result your teacher has drawn electricity to the fog from a separate line.

[QUOTE = sonerkyl] The master of the peugeot planet program has to open, of course, all of them are using it just to look at the fault code. It is no problem for the pp2000 to remain active, as a result of it, because my teacher pulled the electricity from the fog into a separate line [/ QUOTE]

Thank you when I find a dry floor, I will look at the wiring and relay

08.05.2020 20:11	# 1
doganatak
Hi I started to start the front fog event for 206 X Line. * While my friend was looking for a piece for himself, the front bumper looked at me in the puzzle, but the name of the publisher was not the price at all. Paint will be required even if it is the same color. * I decided to buy a new bumper. Can I remove the front grille from the front bumper, etc. Is it okay to take it blank? * What do you think I need to pay attention to when painting the bumper? Or is there a place that you can recommend on the European side in Istanbul that is both knowledgeable and reasonable. There was a painter I knew before, but what is the reason? I will paint the bumper completely, I will paint it on the rear bumper. * I think that I can remove and install the front bumper myself. * I will consult one more thing and connect the front fog to the console with a separate button. because it's not original * What is the paint code in the picture I added below? Thanks

08.05.2020 20:11	# 5
Gokcesel
[QUOTE = doganatak] Hi I started to start the front fog event for 206 X Line. * I decided to buy a new bumper. Can I remove the front grille from the front bumper, etc. Is it okay to take it blank? [/ QUOTE] You can buy and install the GTi bumper from the Peugeot market. Do not buy it alone, the quality of fog lights is very bad. Get a bumper + grill + tank fog light. It is the closest brand to the original. [QUOTE = doganatak] * What do you think I need to pay attention to when painting the bumper? Or is there a place that you can recommend on the European side in Istanbul that is both knowledgeable and reasonable. There was a painter I knew before, but what is the reason? I will paint the bumper completely, I will paint it on the rear bumper. [/ QUOTE] Why are you mixing up with others? If you will enjoy the car when you look at it, paint it. I, too, including the generations I had painted, which I never regretted. In the belts at the doors are black, paint them too :) You can use it with a nice oven paint without any problem. Just do not hold pressurized water too closely. [/ QUOTE] [QUOTE = doganatak] * I will consult one more thing and I will connect the front fog to the console with a separate button. not original [/ QUOTE] As Soner brother said, you can activate the front fog feature with the pp2000 program. I think that 90% fog installation is available, you only need to install and activate the fog. If you don't have it, you can do it with an external button, but don't pull it out of the back fog. Then the front fog does not turn on without turning on the rear fog, and the rear fog lamp is turned on for people coming behind you. Every time I come across, I count, swear, open the lengths and go behind.

	206 X Line Front Fog and Bumper
• Homepage » PEUGEOT MODIFIED PLATFORM » Modification and Tuning Information

08.05.2020 20:11	# 2
sonerkyl
1- The publishers, unfortunately, my teacher is no longer suitable as before. As you said, you will need all kinds of paint. If you say why 2-full price will be appropriate, you will get 120 TL empty fog fog lamp, my teacher will keep 50-60 TL, worst 170 TL, if you give 20 TL more, you can stop or sell the other buffer spare. 3-There is no need to pay attention to the paint whilst you are a good master. your master didn't want to deal with it a little bit You can remove 4-front bumper by yourself. There are many videos on youtube. they just want 100 TL for bumper removal. You can use 5-valla as originally, do not have a fuse that will be connected with pp2000 from the arm and be replaced first in the motor fuse box. some models only have a fuse, but no role, in others no fuse. others do not have a role, and do not have a fuse, and some do not. Let's add the photo of the engine fuse box. 6-There is no problem, you can connect it in the important rear fog whether it works or not. 7-KMFD paint code brother.

08.05.2020 20:11	# 3
samet206
If the vehicle does not have the necessary wiring for the fog lights, I would recommend that you operate the fog with a separate wiring, relay and button. I recommend cutting it to reduce the cost.If the bumper in your hand is original and intact, cutting can be done.

08.05.2020 20:11	# 6
doganatak
Thanks friends That was the fuse you asked @sonerkyl @ fusebox? doganatak 2017-02-15 09:00:10

08.05.2020 20:11	# 10
doganatak
[QUOTE = sonerkyl] okay my teacher has a plumbing probably only one job is to activate the fog and check and install the fuse, hopefully it will burn, or as I said, the fuse box needs to be placed in the role for someone who knows this job should do it for someone who does not know a little risky operation [/ QUOTE] Anyway, someone who does not understand work is equivalent to my luck. Anyone who has software to do PP2000 activation, right? Well, let's assume there is no relay or something, I activated the fog, but I pulled the cable relay, etc., outside the fog, and got it connected.

08.05.2020 20:11	# 11
sonerkyl
The peugeot planet program master has to open it, of course, all of them are using it just to look at the fault code. It is no problem for pp2000 to remain active, as a result your teacher has drawn electricity to the fog from a separate line.

08.05.2020 20:11	# 12
doganatak
[QUOTE = sonerkyl] The master of the peugeot planet program has to open, of course, all of them are using it just to look at the fault code. It is no problem for the pp2000 to remain active, as a result of it, because my teacher pulled the electricity from the fog into a separate line [/ QUOTE] Thank you when I find a dry floor, I will look at the wiring and relay