206 x-desing MOTION PROBLEM |
|
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 18:49 | # 1 |
muhammet.ozdiyar | |
Let me tell you there in my car abrupt temperature rise as the vehicle does not overheated in the long road 3 speed on top of the gear everything in get stopped in the normal, but the city, idling while waiting and immediately fervor pointer slopes off last leans against STOP writing fan opening and coming down again covers 90 from driving for 2 minutes and he is constantly doing this ... i showed it to the master He said the temperature sensor and thermostat changed but still the same problem continues. |
08.05.2020 18:49 | # 2 |
peugeotefe | |
Your vehicle is diesel powered
|
08.05.2020 18:49 | # 3 |
muhammet.ozdiyar | |
gasoline
|
08.05.2020 18:49 | # 4 |
peugeotefe | |
Do you get the air of the engine water well? If there is no air in the water, the fan residence should be checked. If there is no fault in it, the gasket is burned.
|
08.05.2020 18:49 | # 5 |
muhammet.ozdiyar | |
Air is removed, but the problem may be a problem with the same circulation pump.
|
08.05.2020 18:49 | # 6 |
muhammet.ozdiyar | |
Is there anything to help?
|
08.05.2020 18:49 | # 7 |
peugeotefe | |
There is a possibility that it is because of my circulation, but I always have to do the ceiling.
|
08.05.2020 18:49 | # 8 |
anlersan | |
The same problem exists in me when the traffic is started to rise immediately in the traffic jam, it comes down to the air conditioner.
|
08.05.2020 18:49 | # 9 |
Barut | |
Does the vehicle open the first fan? The first fan opens around 95, the second opens above 110 degrees. If it doesn't turn on the first fan, it's probably waiting for 110 degrees and turning on the second. |
08.05.2020 18:49 | # 10 |
muhammet.ozdiyar | |
My car does not turn on the first fan, only when the temperature rises to the top, only the fan turns on
|
08.05.2020 18:49 | # 11 |
anlersan | |
[QUOTE = peugeotefe] Do you get the air of the engine water well? If there is no air in the water, the fan residence should be checked. If there is no fault in it, the gasket is burned. [/ QUOTE] How to bleed engine water |
08.05.2020 18:49 | # 12 |
peugeotefe | |
[QUOTE = if you understand] [QUOTE = peugeotefe] Do you get the air of the engine water well? If there is no air in the water, the fan residence should be checked. If there is no fault in it, the gasket is burned. [/ QUOTE] How to bleed engine water [/ QUOTE] Complete the water of the engine reserve water tank. While the vehicle is running, there is a 5-bolt bolt on the thermostat. Open it. |
08.05.2020 18:49 | # 13 |
Barut | |
[QUOTE = muhammet.ozdiyar] My car does not turn on the first fan, only the temperature turns on the top only when the fan turns on. Have the fan system checked first, first look at the fan resistance, usually the problem is resistance. |
08.05.2020 18:49 | # 14 |
muhammet.ozdiyar | |
I will now look at all the possibilities until the problem is solved. I took it to the master, I said that there could be a problem in the resistance.
|
08.05.2020 18:49 | # 15 |
muhammet.ozdiyar | |
And I asked the master again in the industry. He looked at the room, if he could have burned this gasket. He looked at the engine. |
08.05.2020 18:49 | # 16 |
muhammet.ozdiyar | |
and the resistance came, we changed it, the problem is solved, now the first fan has reached 95 degrees, it is working ... I did a test drive, stop, I got slow, I forced it a little, thank God my problem was solved ... Thank you very much for all the masters here.
|
08.05.2020 18:49 | # 17 |
Barut | |
[QUOTE = muhammet.ozdiyar] and the resistance came, we changed, the problem is solved now the first fan is running at 95 degrees ... I did a test drive, stop, get up, I drove a little bit, I thank you very much, thank God my problem is solved ... Thank you very much, they would have said that they had burned the seal here. [/ QUOTE] Glad to have the problem resolved :)
|