Hello friends, I saw friends at the meeting today. I was wondering, I said let me share it. There were a lot of people around the back fog. We set out for this purpose. First there was a single nail led bulb that we called 1156. Both a flashing and a steady burning application was made with a pictured circuit placed in the bulb. When you first turn on, the leds on the bulb are steady. When you turn it off and on again, the series is blasting in the style of a police flint. This continues as a loop. We took out the leds and checked the circuit. It took 12v and gave 12v to our business. First we removed the fog. we removed the red plastic with the help of hot water and falcata. I cut the perforated plate where I can sit the leds in a shape that will fit inside the fog. First I filled the plate with led. It was pretty bright. Then I thought about some design while I tried to write 206 and it was nice. I used 28 5mm round head white leds. I connected a 4-series and I connected every 4 in parallel, each l fell 3 v. I had no resistance. First, we tried hard and it was very successful. We fixed the led layer inwards so that it is not inside or outside, slightly angled according to the lowness of the sisfar and the back one sees. I connected the circuit of the LEDs to the circuit that I removed from the previous bulb and single nail feet. It was just like the original. Finally we installed the fog light back. We put the light bulb under the fog socket and closed it. We made it waterproof without punching cable etc. The result was beyond wonderful. If I could connect resistors, we could get a brighter image, so the driver in the back sees it very comfortably. No detailed photos. He has a small video (I'm not sorry for the title) [TUBE] 2z57A_K_Kv4 [/ TUBE]
Alicilik
Serkan