![]() ![]() |
|
![]() |
206 Windscreen automatic assembly |
• Homepage » PEUGEOT MODIFIED PLATFORM » How To |
08.05.2020 15:17 | # 1 |
![]() |
|
![]() The excerpt from the official forum of the door of the vehicle. ![]() |
08.05.2020 15:17 | # 2 |
![]() |
|
One of the most disliked aspects of the 206 vehicles is that these glass buttons are very useless for what they do.
|
08.05.2020 15:17 | # 3 |
![]() |
|
I don't think it can be mounted somewhere else at the door |
08.05.2020 15:17 | # 4 |
![]() |
|
I am thinking of installing it next to the door handle. thanks for your comments
|
08.05.2020 15:17 | # 5 |
![]() |
|
After the shape of the button or the button you will insert is seated, the rest is done with the modification of the electrical installation. But bellows tires on doors are usually connectors, you need to find a blank pin there. If there are not enough pins, if you pass the cable directly, you will have to disconnect the cable or cut the cables when you have to remove the connector in the future. It is a little challenging but not impossible, it should be easy now.
|
08.05.2020 15:17 | # 6 |
![]() |
|
awakenings not to make too many buttons 4 glass vending machines with a disgrace sitting behind the back looking for glass handle 1 hour
|
08.05.2020 15:17 | # 7 |
![]() |
|
[QUOTE = Serhun] After the shape of the button or the button you will install is settled, the rest is done with the modification of the electrical installation. But bellows tires on doors are usually connectors, you need to find a blank pin there. If there are not enough pins, if you pass the cable directly, you will have to disconnect the cable or cut the cables when you have to remove the connector in the future. It is a little challenging but not impossible, it should be easy now. [/ QUOTE] thanks
|
08.05.2020 15:17 | # 8 |
![]() |
|
I HAVE 206+, THE MOST BEAUTIFUL PLACE YOU CAN MAKE IS THE BEST WHERE YOU HAVE A 2-PIECE CONNECTION TO THE DRIVER'S DOOR AT THE BACK OF THE RIGHT FRONT DOOR. |
08.05.2020 15:17 | # 9 |
![]() |
|
I think it is not an issue to be carried to the door ... as serhun's brother said, the doors must have great effort since the doors are plugged. but the gear can be moved to it or somewhere in the torpedo. it's much easier. Carrying it to the door will not be too big and not very original.
|
08.05.2020 15:17 | # 10 |
![]() |
|
There are glass opening buttons produced just for this problem. The 206 interior doors we know are close to the handles, but on very nice buttons. it would be better if it was original.
|