Peugeot Forums - Peugeot Fan Club

206 water leaking

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 18:52 # 1
cayirovali
Right friends, I put antifreeze a couple of days ago, when I got into the car this morning, I noticed that the mat was green, I saw it, I saw that the gas pedal dropped between the two joints, I saw it, I went to the electrician, I have a problem, I showed it in the car, I looked at it, I got a honeycomb. I would like to be a member immediately, I hope you can help. Thank you for your suggestions.
08.05.2020 18:52 # 2
samet206
Correctly said the heating honeycomb may have exploded.But if the master's attitude was opened and checked incorrectly, the honeycomb is intact, maybe the gaskets are missing. That's why he has to look.
samet206 2014-11-07 22:32:07
08.05.2020 18:52 # 3
cayirovali
I showed you a couple of masters that I do not understand.
08.05.2020 18:52 # 4
samet206
I couldn't figure out the industrial logic of your city. If you take the part, what does it mean, you go to a normal service. You are right to have a problem of trust in the face of this situation. I think you should go to a few more places. The problem is one of the things we mentioned but don't risk it. As I said, go to a few more services.
samet206 2014-11-07 22:37:12
08.05.2020 18:52 # 5
cayirovali
Kocaeli says to get the spare parts from gyro, not a special service, but a normal repairman, I go to see the electricians are looking at these problems, I went to three people, one said that the honeycomb will change, the other two say that the gasket and the bolt on the joint will change and the honeycomb will change, 200 people will say that it will change the gasket and the bolt will change the honeycomb to the garage.
08.05.2020 18:52 # 6
sezar206
If the fuckin broke, the honeycomb broke out, he would have missed the antifreeze before he could go out. Let them take the seals out of the seal. Receiving honeycomb. Then if he misses again, then you can buy honeycomb and his workmanship was actually worth 250 doses and they did it, but there was a friend on this site who changed it without being dosed again. But I guess it was 307. Maybe it is also in ours.
08.05.2020 18:52 # 7
sezar206
Is there a problem like overheating.
08.05.2020 18:52 # 8
cayirovali
I looked at sometime 80 feels
08.05.2020 18:52 # 9
samet206
This antifreeze is caused by putting the wrong, you will not put it directly, you will mix it with water, the antifreeze mixture will be balanced. I am not a couple of places to investigate the service, after making the final determination of the service and opening it, it will not tell you otherwise. If you miss it later, if you want to buy honeycomb again and go to change, if you pay 2 times, this work will not be through trial and error. It is best to find a beautiful master. To take a piece or to force the master to change the gasket, the man changes the gasket and continues to flow. You pay twice for labor. Understanding is a simple process that can make this malfunction, most of the people who are prone to change their own, do not disassemble the honeycomb on the stand, but unfortunately, most people do not disassemble it. :) Again get well soon.
samet206 2014-11-07 22:44:57
08.05.2020 18:52 # 10
Mbiwa
Man, the same thing happened to me I thought the honeycomb, just make sure it was sealed. Then you will go to the radiator, not the electrician. The radiator will be made from you and will receive a maximum of 50 TL. Go to the radiator, he said directly. Do not worry, when you put an antifreeze, it has nothing to do with honeycomb
08.05.2020 18:52 # 11
samet206
Look, everyone writes that he knows his idea, but if you are a master, let me come to you, I do not refute the theses you have written. I am trying to help the friend. If you say you have nothing to do with honeycomb, you would say that this situation would not be related to honeycomb.
samet206 2014-11-07 22:40:13
08.05.2020 18:52 # 12
cayirovali
I will ask for a few more places tomorrow, and I will evaluate it accordingly, but this gasket event lay on my head because it drips, especially in two forums between two joints. I do not leave it directly in the hands of the amateurs. If it was about the time, nobody pays attention, I do not cover the general account, I do not cover the general account. to solve the short-term leftovers
08.05.2020 18:52 # 13
ysndrsn19
My 206 also has the same problem. It would be nice if you shared the reason and cost when you solved the problem. Thanks
08.05.2020 18:52 # 14
ibanez_022
In such cases, it will be healthier to receive services from its own services, let's say the honeycomb will change; Let's say 100 TL for honeycomb, 150 TL for labor and 250 TL. If the new honeycomb explodes after 15 days, the repairman who wears the honeycomb will take labor again from you, but the honeycomb will not be guaranteed.
08.05.2020 18:52 # 15
cayirovali
Today I will go to the service, let me see what they will say, I will draw a road according to him.
08.05.2020 18:52 # 16
mesut1806
I had the same I had looked at the water 2 weeks ago, it was empty, then the winter came, I pressed the antifreeze 3 days later, I looked again, the same mat was officially there, the lake was bent, I looked at it drop by drop, then it was missing by the attachment then I asked the electrician like you did room chronicle 206 problem piece is not money but the front chest will be removed Workmanship money is 200 TL, I said, keep it on the floor, I went to the gas station, bought 2 radiator plugs, I took it every 10 minutes, and the flow was stopped. mesut1806 2014-11-21 00:28:31
08.05.2020 18:52 # 17
ahmed206
My brother is already taking out the honeycomb to replace the gaskets (I have also lived). Chronic problem of leaking water from the seals to the driver's side in the 206s ...
08.05.2020 18:52 # 18
outlaw
FRIENDS THERE ARE NEEDS TO EXPLORE PETEK ...
EVERYONE KNOW WHEN IT IS MISSED IN THE HONEYMOON, they Squeeze Closing Concealer, TEMPORARY AND MALESEF ANTIFREEZ THAT MAKES THIS CHEMICAL CLOSER FLUSHED.
EE WAS NOT FLOWING BEFORE EWET DOESN'T FLOW BECAUSE TEMPORARY CLOSED ...
IF YOU ASK MY IDEA, REPLACE THE HANDLE AND SEALS COMPLETE LET IT MAKES A LOT OF BUSINESS 3-5 ACCOUNT TO MAKE A LOT OF BUSINESS ACCOUNT WHEN CREATING A COMFORT OF THE SEALS WHEN IT HAS COMPLETELY ...
GET IT NOW ...
08.05.2020 18:52 # 19
zerzevat
I've had the same problem for two years. But my problem is only when the air gets too cold. it's a leak of maybe 1-2 cups over a winter.

my research is that the problem is definitely gasket-related. When the air cools, the pipes shrink (opposite to expansion) and the sealing gaps open.

My advice:
1- Screw-nut (butterfly screw or something) into the missing screw points and tighten.
2- If it is not cut, the chest does not need to be removed for gasket replacement. Remove the pipes by the motor. Remove the screws from the inside and remove the pipes and change the gaskets.
3- If not resolved, use radiator repair fluids. but do not overuse and block the channels.
4- It did not happen - it means that the heater core will change now. I think 307 does not need to dismantle the console. but I do not know if it is possible to change without dismantling at 206.
08.05.2020 18:52 # 20
denizci33
My brother original honeycomb + labor cost me 255 pounds; When you open it, if you renew it completely, your head will be comfortable; you go on a patch and continue to some extent; after a while that gasket will miss again ..
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”