Peugeot Forums - Peugeot Fan Club

206 Tuning help

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 15:38 # 41
ultrasn0w
no paint no left back is standing on the back with a liner, sunrof :)
08.05.2020 15:38 # 42
106_arts
don't you have a picture of your vehicle
08.05.2020 15:38 # 43
ultrasn0w
I just said, my phone was stolen today, I will add 2-3 days until a new phone arrives
08.05.2020 15:38 # 44
tigerland
Kent Cams PT60 (258/260) Grade Eccentric
Chip Tuning
Cover Grinding
Performance spark plugs and cables
Peugeot Regulated Pulleys
Turbo charger
supercharger
Short Transmission
Cone Set Adjustable Shock Absorbers
Tower Tensioner
OZ Racing Aluminum alloy wheel
Air cooled brake discs
Brembo Caliper
The result :))
[TUBE] caslguvtıty & feature = share [/ TUBE]
ferrari discs to stop the vehicle :)))
Erb's 2011-06-16 00:59:21
08.05.2020 15:38 # 45
ultrasn0w
Tools gives the right to beautiful, but it will be something very different than my plan will be surprised to turkey :) nobody can do I will do my madness ...
08.05.2020 15:38 # 46
ultrasn0w
Friends, no one to help with the gearbox?
08.05.2020 15:38 # 47
Guests
If you know what you wrote, we will see 206 images, and we will wait for the picture and video.
08.05.2020 15:38 # 48
axi206
I don't want to break his enthusiasm, but gti doesn't lift the engine and transmission so much
08.05.2020 15:38 # 49
Guests
Good luck with your new vehicle, you made a right choice ...


08.05.2020 15:38 # 50
d3n1s
The transmission is a bit troubled in pugs, as far as I know, the model using the common gearbox is very few and the gearbox is not as good as a German car gearbox. I had to change the new gearbox, thanks to the old owner of the vehicle, I know from there. I thought of installing a different gearbox, but I learned that the only gear suitable for the car was the gearbox on the vehicle. I wanted to change the mirror, then it was going to work itchy, I couldn't do it either. However, by combining 2 transmissions, you can create a transmission that is close to what you want, and its cost was around 5-6 thousand liras for my car. So the amount you're thinking of spending is half :)
08.05.2020 15:38 # 51
ultrasn0w
[QUOTE = axi206] I don't want to break the enthusiasm but it won't lift the gti engine and transmission so much
[/ QUOTE]

I have already mentioned everything above, I know that the GTI engine will not lift it plainly, so I will use titanium cast and do a little research on the gearbox, I hope I will meet with 2-3 places today. Sleepy
08.05.2020 15:38 # 52
Guests
http://www.dp-engineering.nl/en/projects/206_itb_turbo.php
I recommend the detailed review of the heat I give. There are big projects that will illuminate your path ...
GTI = 468bg Sırıtma
08.05.2020 15:38 # 53
ultrasn0w
BNİM gti NOW 441 hp Sırıtma I'm getting tired now
08.05.2020 15:38 # 54
ultrasn0w
By the way, what do I lie? I'm afraid to take the engine in my arms, although I will use titanium GKN 1
08.05.2020 15:38 # 55
psychoabi
construct. You can do as you wish. the psychoab 2011-06-16 12:10:44
08.05.2020 15:38 # 56
ultrasn0w
[QUOTE = psychoab a] construct. you do as you wish, I look forward to the monster that will come out with excitement:) [/ QUOTE]

thank you bro i hope i will Gülme
08.05.2020 15:38 # 57
Guests
[QUOTE = ultrasn0w] [QUOTE = psychoabi] ins. you do as you wish, I look forward to the monster that will come out with excitement:) [/ QUOTE]

thank you bro i hope i will Gülme
[/ QUOTE]
Let's see the vehicle information in the summer Göz Kırpma
08.05.2020 15:38 # 58
ultrasn0w
It's ok :)
08.05.2020 15:38 # 59
ultrasn0w
Yes, friends have been negotiated for the gearbox today and we found a good solution titanium powered gearbox (the room will be in Syria).

As I said, I will remove the turkey's full of the most robust 206 gti` :)

441 HP :))
08.05.2020 15:38 # 60
insomnia
crazy proCe befitting lion no think
Page : / 3
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”