206 Trouble shifting into reverse gear in Manual Gear ..

Guys, I have 206 models of 2006 model, but when I put it in reverse gear, when I try to push it a little bit, I rub it on the gears and what do you think I should do?

it has to be chronic, I have the same problem.

So this is a chronic problem

I got used to it now

so there is nothing to be done I hope it will not create a bigger problem in the future ..

If the best method is not to shift into reverse, put the vehicle in 1st gear and move it for a few inches, then you will see that it shifts back into normal, it is fixed with experience :))

Attach to 1 then 2, then plug back

Unfortunately, I have a model that I know has a chronical malfunction, let's get two, but pejoda maşallah :)

It is useful to plug it in and take it back.

I also occasionally, when I move the vehicle a little, I put it in gear.

peel up the gearshift up a little bit of oil and you will feel that the gear is more comfortable :) it may be a chronic thing, but most people complain that their gears are very hard, such a relief will be softening.

What is chronic is that it does not go away when it is attached occasionally. For years, I have not seen any problems with its damage, but its external sound is another thing.

When I say the gear, I leave the clutch a bit and put it back with a slight rub, so I normally don't have it :)

[QUOTE]

Nothing will be the same, even in Toyota. The reason is that the 5th gear and reverse gear use the gear. I have it, but I do not experience this problem most of the time. I guess your hand is getting over time. Try not to the right to the right, not to stand, try to leave a little space. He did not, too, where he clutches in the place where he is stuck, he sits down as if he is sitting, and he does not push back. If you can't, using this method will damage the cart. It didn't happen, just plug it in, then put it back in two, then do it back. When you find the most suitable, you use it. But as I said, I don't have any trouble at all.

We will continue to use the Same Order :)
ysf_syfttn 2014-03-22 13:25:59

the problem of not shifting back is that when the car is cold, that is when I first start it, it is generally not a problem when I release the clutch and press it again