|
|
|
|
206 Tower Tensioner Installation (Gasoline) |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 206 | |
| 08.05.2020 14:02 | # 1 |
 hasimayaz |
|
|
Although the tower tensioner assembly seems simple, it can sometimes cause problems from unusual points. Even diesel engines require complete torture, complete Air intake replacement. Even if the wrong battery is used in some 206's, it may be necessary to slide the cabin. In this article, we will describe an omp tower tensioner with pictures.
We mark the damper seat with the tape by aligning the swept edge facing the front.
We drill a hole from the point suitable for the sheet with 4.5 cm drill dump
we mark both sides of the hole vertically.
We align the top with the hole by aligning our lines. Our hole (with a solid hacksaw) takes the form of a channel.
We cover the cut parts of the sheet with roving.
We finish the process by assembling our tensioner. We keep the path of a robust rot master who understands the job for tuning. |
|
| 08.05.2020 14:02 | # 2 |
 asi_cocuk |
|
|
assembly is good respect for labor
|
|
| 08.05.2020 14:02 | # 3 |
 mAsKot |
|
|
nice picture |
|
| 08.05.2020 14:02 | # 4 |
 Guests |
|
|
I think something related to motor or electricity dgl
|
|
| 08.05.2020 14:02 | # 5 |
 HakanGokdemir |
|
|
It is the healthiest to ask the authorized service or even 2 separate services, it is not possible with the assumptions we will make here ... In fact, even if you are going to do such applications, even written in the service may have trouble after approval. |
|
| 08.05.2020 14:02 | # 6 |
| hasimayaz |
|
|
[QUOTE = Horizon] Nice clean job, would it break the guarantee? does anyone know? [/ QUOTE] If it reports the reason for a malfunction that will occur under the warranty as this part, it will break it. It does not cause any malfunction, but .. It may be an excuse for the official.
|
|
| 08.05.2020 14:02 | # 7 |
 SelmanBeber |
|
|
WHAT IS THE WORK AT THE END OF THE PROCESS OF THE USTAM ROT MASTER. TIRES THAT WILL REQUEST ROTARY SETTING.
|
|
| 08.05.2020 14:02 | # 8 |
| hasimayaz |
|
|
[QUOTE = r3el] WHAT IS THE WORK OF THE USTAM ROT MASTER AT THE END OF THE PROCESS. TIRES THAT WILL REQUEST ROTARY SETTING AGAIN. [/ QUOTE] Usually nobody can listen to the rod adjustment or something after installing it. But after the optimum tension, a control should be performed on the rod adjustment.
|
|
| 08.05.2020 14:02 | # 9 |
| Demir |
|
|
Good explanation ....
|
|
| 08.05.2020 14:02 | # 10 |
 syz33 |
|
|
I was wondering what it would be like and I still wonder how it is nice but it is difficult for those who do not know ...
|
|
| 08.05.2020 14:02 | # 11 |
| syz33 |
|
| 08.05.2020 14:02 | # 12 |
 muratcantona |
|
|
good job, good health
|
|
| 08.05.2020 14:02 | # 13 |
| Guests |
|
|
It was a very good expression. Health to your hand. After replacing my car's rims and tires, I am thinking of applying. |
|
| 08.05.2020 14:02 | # 14 |
| 106_arts |
|
|
I had it just because I did not cut that part, I sold it back
|
|
| 08.05.2020 14:02 | # 15 |
| Guests |
|
|
[QUOTE = hasimayaz]  [/ QUOTE] What is the price of the Nu product? Is this product high quality or does it have better quality? |
|
| 08.05.2020 14:02 | # 16 |
 Serhun |
|
|
Health, workmanship is also the number ten, especially the suppository is very good for your hand, which has been a very good sharing.
|
|
| 08.05.2020 14:02 | # 17 |
| Guests |
|
|
@ mustiii The omp brand in this picture is already inherited. but some have a place for adjustment. this is not there. though it is not very important anyway. This tower tensioner alone is not necessary for most users. In general, it is beneficial for the people exhibiting spritive use. For example, sometimes I see people in person. Under the man standard 175 65 14 tires, but with a tower tensioner. I'm asking, no, why did you put the tensioner on? The friend replies "let it go very well into the corner". What is it to do if I don't have a tensioner after holding the tire. If you want to keep your way, go and get a 15 "16" performance tire. the tower tensioner will fill when the next heat says :))
|
|
| 08.05.2020 14:02 | # 18 |
| Serhun |
|
|
But when you open the hood it looks so cool isn't it enough? :-)
|
|
| 08.05.2020 14:02 | # 19 |
| Guests |
|
|
[QUOTE = CeCoLi] @ mustiii The omp brand in this picture is already inherited. but some have a place for adjustment. this is not there. though it is not very important anyway. This tower tensioner alone is not necessary for most users. In general, it is beneficial for the people exhibiting spritive use. For example, sometimes I see people in person. Under the man standard 175 65 14 tires, but with a tower tensioner. I'm asking, no, why did you put the tensioner on? The friend replies "let it go very well into the corner". What is it to do if I don't have a tensioner after holding the tire. If you want to keep your way, go and get a 15 "16" performance tire. the tower tensioner will fill when the next heat says :)) [/ QUOTE] I currently have standard hair rims and 175/65/14 tires in my vehicle, but I plan to buy 1 set of steel rims. I'm going to wear 195/45/16 tires. After finishing these operations, I will need the tower tensioner. Best regards. |
|
