|
|
|
|
206 Torsions |
| • Homepage » PEUGEOT MODIFIED PLATFORM » Modification and Tuning Information | |
| 08.05.2020 17:24 | # 1 |
 MuRaTTTT |
|
|
|
|
| 08.05.2020 17:24 | # 2 |
 ertanakar |
|
|
They say 450-500..European side..I have the same problem.  |
|
| 08.05.2020 17:24 | # 3 |
 MagicPerformance |
|
|
Be sure to pay attention to the super price of 150 TL :) |
|
| 08.05.2020 17:24 | # 4 |
 _semihk_ |
|
|
may be low for repair if the fault is large but a lot of money to lower
|
|
| 08.05.2020 17:24 | # 5 |
 jack67 |
|
|
The same problem exists in me. The balls will change, if the shaft is gone, a new one will be made or a new shaft will be bought and nailed. we asked zero miles for the side 2si & nbsp; We have received a price of 100 lira. If there is no problem, it will be repaired if possible. Removal and disassembly of the torsion. We got a price like 100 liras. The cost costs a total of 460 pounds. It costs 410 pounds if it is replenished and repaired. A price is more or less like this. No damage. I hope I could help. |
|
| 08.05.2020 17:24 | # 6 |
| MuRaTTTT |
|
|
[QUOTE = jack67] The same problem exists in me. The balls will change, if the shaft is gone, a new one will be made or a new shaft will be bought. I gave we asked zero miles for 2 sides 2si & nbsp; We have received a price of 100 lira. If there is no problem, it will be repaired if possible. Removal and disassembly of the torsion. We got a price like 100 liras. The cost costs a total of 460 pounds. It costs 410 pounds if it is replenished and repaired. A price is more or less like this. My recommendation is if the shaft is worn, replace it with a new one. If there is no damage. I hope I could help. [/ QUOTE] Thank you for your valuable comments. I think it will be more explanatory, I think there is only the problem in the back, and I actually say that I will make it, and I say that I have a tooth reduction.
|
|
| 08.05.2020 17:24 | # 7 |
| MagicPerformance |
|
|
If you are going to lower the back, use a hard suspension or you will have to deal with torsion. |
|
| 08.05.2020 17:24 | # 8 |
| MuRaTTTT |
|
|
No, the plateau torsion will be lowered at an affordable price?
|
|
| 08.05.2020 17:24 | # 9 |
 GokhaN |
|
|
For 150 TL, we can do the spring installation torsion reduction process. Avoid unskilled craftsmen because it is very affordable. Don't incur bigger expenses. |
|
| 08.05.2020 17:24 | # 10 |
 SDYMZ |
|
|
how many inches to lower a tooth torsion
|
|
| 08.05.2020 17:24 | # 11 |
| GokhaN |
|
|
[QUOTE = SDYMZ] How many inches of lowering a tooth torsion lowers the back [/ QUOTE] Around 4 - 4.5 cm
|
|
| 08.05.2020 17:24 | # 12 |
| jack67 |
|
|
I can tell you how to do if you want, I learned the work well while doing my torsion :) |
|
| 08.05.2020 17:24 | # 13 |
| SDYMZ |
|
|
can we do it ourselves? If you are done tell me I would be happy |
|
| 08.05.2020 17:24 | # 14 |
| serkan719 |
|
|
you do it yourself I need a lift. and some skill To remove fluxes from 4 bolts. but it's not very simple. |
|
