206 Torsion Repair Explodes

Hello friends, my vehicle (206 hdi) started to hear a lot of noise from torsions, there are quite loud sounds, I showed the master a rough draft, 500-600 said, there are people who have done this work cheaperly around Bursa for repair, let me make a sound for 6-7 months.

[QUOTE = baroff] Hello friends, my vehicle (206 hdi) started to hear a lot of sounds from torsions, it sounds pretty hard, I showed the master a rough draft, 500-600 said there are people who have done this work cheaperly around Bursa for repair. / quote]
now I do not understand where the price comes from. It was a matter of yesterday while I was chatting with repairman friends. My vehicle is 106 qs but I don't know how much difference it will be. They said let's drop a little more from the torsion of my car. I have no torsion, then I said. What if the room would be 35 lira repair team said. They said that the only problem is to take it off and take it to the lathe is not a room to do. Of course, I do not give any workmanship to me, how much will the latheer take, let's get the father's room 100, what's the price?

Today, I went to the service with the suspicion of torsion. We fixed the rear shock absorber with two hammer strokes that slipped off, thank goodness.

I made it for 320 lira.

torsion set pair takes 100-150 in 70 TL turner

[QUOTE = gngburak] torsion set pair takes 100-150 at 70 TL turner [/ QUOTE]
I think the price given to a friend is a very cold figure

[QUOTE = gngburak] torsion set pair takes 100-150 at 70 TL turner [/ QUOTE]

My friend has the same problem with me, my master has said a figure like 400 TL with the original parts, already the whole work is taking the tornier.

Well, I asked about this conversation in the past, especially when I go today, I think it will be very high. I am thinking of taking a hand on mine because I am deep inside. It stays in the evening because I find it. It is done in the daytime because he has a turning business, he said, waiting for him

It is settled for 350 liras.

[QUOTE = mahoni41] My friend has the same problem with my master, he said a figure like 400 TL with the original parts, he already takes the whole tornier. [/ QUOTE]
Did you ask the master what the 400 lira was? folks what are they paying for such things? I changed the complete gearbox to 500 liras

[QUOTE = rockwaryumm] [QUOTE = mahoni41] I have the same problem with my friend, my master said a figure like 400 TL with the original parts, the whole work is already taking the tornier. [/ QUOTE]
Did you ask the master what the 400 lira was? folks what are they paying for such things? I changed the complete gearbox to 500 liras
[/ QUOTE]

[QUOTE = baroff] [QUOTE = rockwaryumm] [QUOTE = mahoni41] I have the same problem with my friend, my master has said a figure like 400 TL with the original parts, the whole work is taking the tornier. [/ QUOTE]
Did you ask the master what the 400 lira was? folks what are they paying for such things? I changed the complete gearbox to 500 liras
[/ QUOTE] [/ QUOTE]
I tell you the case with the industrialist logic. It takes 70 to 100 writers gives 100 to a turner 150 writers are bidet workers

So what do you think I can take the parts and find my lathe?

If you were in Ankara, we would solve your job. I'm at my lathe :)

[QUOTE = serkan719] If you were in Ankara we would have resolved your job. I'm at my lathe :) [/ QUOTE]

I'm in Ankara, I have a lathe problem, master, let's handle my job?

[QUOTE = astek automotive] my friend torsion bearing is between 100-150, if the torsion shaft is defective, it takes 250.300 torners as workmanship 100 tl total 450 550 is used with the original parts, 2 years warranty is used, the gin goods are used. [/ QUOTE]

100 lira
50 lira torsion balls
if there are no problems with miles, we get 100 - 150 - 200 if the miles are broken.

The friend explained it nicely, but when the possibilities are limited, our house does not have a lift lathe in it.

I will take 1-2 lathes around tomorrow, and now I have to make it to the person who gives the reasonable price. Unfortunately, if you want more than 400, you can get the total cost.