206 tire pressure

Friends, I have 1.4 hdi feline. I just noticed that the rear tire has come down. I wonder if anyone knows how much the front and rear tire pressures will be.

Set the front and rear to 32 PSI. It will be enough.

Check your tire which has been deflated without delay. It may be missing the air.
06ÖZGüR06 2011-12-21 20:31:42

thank you ..

[QUOTE = logic3170] thank you ..
[/ QUOTE]


Thank you. I wish you a safe journey

It says 35 psi but I hit 32

It should be 35 psi with the vehicle loaded. When it is loaded, the pressure should be higher. If it is not loaded, 32 psi is already normal.

I air up to 206 & nbsp; all 206 wheels to my vehicle & nbsp; Hitting

I'm printing 29 too when they said they were going to die when changing tires

I do not know how accurate I had heard that the factory dimensions should be shot without the difference of the loaded, unloaded die in taxis, but 32 well I hit 35 the room was fine & nbsp; both of them have no slippage car, but at 35 you feel a bit more road naturally & nbsp;

If your rim dimensions are original, how much air you need to hit your tires in high and high condition is written on the pole behind it when you open the door to the sofor. Reviews

the rear tires are good, while the normal 32 is loaded.

[QUOTE = koliva] If your rim dimensions are original, how much air you need to hit your tires in high and high condition is written on the pole behind it when you open the sofor door.
[/ QUOTE] this is complete thank you.

WE HAVE A LIST OF AUTOMOBILE BOOKLETS TO TIRE OUR TIRES , I WANT TO GIVE YOU THE FORMULA OF PSI SIZE UNIT & nbsp; MORE USED IN OUR COUNTRY.

WE CAN GIVE A VERY SIMPLE FORMULA FOR THAT.

BAR * 14,50326 = PSI

SAMPLE

2.2 BAR HOW DOES PSI?

2.2 * 14, 50326 = 31.90 PSI & nbsp; & nbsp; i.e. & nbsp; & nbsp; we will print 32 Psi air.

Prevents 35, rear, 32, I have been doing this for years. It is softer on the road and the handling is better.

I always print 29. The car bounces too much when the pressure is too high. But when the pressure is high, the traction of the vehicle increases significantly.

I write 2.3 PSI on my doorpost. & Nbsp;

I'm printing 35, it feels like the road but the traction is nice.

According to the car's door by value & nbsp; the front tires are 33 psi rear tires & nbsp; 31 psi, & nbsp; but I think 1 or 2 psi for the life of the suspension because of the turkey path Sartain would be appropriate to print low.

185-55-15 pressure should be & nbsp;

[QUOTE = koliva] If your rim dimensions are original, how much air you need to hit your tires in high and high condition is written on the pole behind it when you open the sofor door.
[/ QUOTE]