206 tire and headlight help my problem

rebel_43 2015-03-08 01:40:43

I do not know about the tire event, but the problem of the angles is that it will either be cleaned or sandpaper or there are different forms on the internet.

There is no solution other than cleaning for the headlight and most of the solutions go through the materials called sanding varnish, but you do not need to buy these materials, you can clean them for a fee in a place where you do not need to buy more materials.

or sandpaper is made with 2000 water emery you get 1 tl, you can have complete sanders with mild liquid dishwashing liquid, as well as pastes like toothpaste. If they do completely disassemble for a maximum of 15 minutes than what they do with, then it will take a long time. no hitting sound from the tires

Hodja, if you describe it well, these headlight polishes are not 5 TL materials, 3M's 50 TL maguıars, 40 TL headlight stop polishes. If you want to do it yourself, if you want to do this yourself professionally, it will be a total of 40 50 TL. You will always apply the advantage here.

Without a machine, it doesn't work. Hand rub my dad, rub my dad, will my rub end?

I do not know about the original spring. Meanwhile, they do the headlight cleaning for 50 TL ... it does not make sense. Alacan a polishing machine, 80 pounds ... give the enthusiasm the devil says

THERE ARE I MAKE A GLASS WITH ITS LIKE TO MAKE A GLASS WITH ITS LINGER, I HAVE LARGE, WITH ITS LINGER, I HAVE LARGE WITH ITS LINGER PASTE. YOU KNOW IT DON'T MATTER FOR 4 YEARS, I SOLD THE SORA TOOL, I DID NOT BUY A SPECIAL SET, THAT I HAVE MADE IT TO PREVENT SURA, I HAVE A HEADLIGHT FILM, THERE ARE TAKE IT FROM TRANSPARAN, BRAZE ON THE MATERIAL, BRAZE ON THE MATERIALS BRAZE ON THE MATERIALS BRAZE ON THE MATERIAL, BRAZE ON THE MATERIALS, KEEP IT FROM THE MATERIALS TO GET THERE