206 temperature problem

primarily mrbs koliva. Let me rewrite the problem of my vehicle, I would be glad if you could help. As soon as my car's temperature gauge is over 90, it quickly turns to 140. up to the red colored floor. however, there is no problem in the vehicle such as boiling water. the stop lamp flashes, gives an audible warning, after 10-15 seconds, the fan is activated and the needle drops below 90 with the fan turned on. I changed the temperature sensor, I changed the fan sensor, I changed the thermostat again. My problem is that I would appreciate if you can help. koliva 2012-03-26 04:54:37

I had the same problem, my friend run your car at idle, disassemble the Turkish screw that goes to the heater hose, close it when water comes out, the problem is solved, I think the car has made air

If you have completely drained the water of your radiator and filled it again, if your vehicle gets air in the air, there is no problem. If there is air, check if it has air in it and try it again.

[QUOTE = djchaos] If you have completely drained and refilled your car's radiator water, see if there is air in your car, if there is no air, check if there is any air, take the air out and try again. How do I know if it is bought and made the weather?

[QUOTE = madara] mrblar koliva first. Let me rewrite the problem of my vehicle, I would be glad if you could help. As soon as my car's temperature gauge is over 90, it quickly turns to 140. up to the red colored floor. however, there is no problem in the vehicle such as boiling water. the stop lamp flashes, gives an audible warning, after 10-15 seconds, the fan is activated and the needle drops below 90 with the fan turned on. I changed the temperature sensor, I changed the fan sensor, I changed the thermostat again. My problem is that I would appreciate if you can help. [/ QUOTE]

Friends have made the necessary comments. Things to do first,

1. Open the bleed plug on the pipe leading to the heating pipe while idling, as in the comments, and allow some water to flow. Do not forget to complete the water from the expansion tank at this time. The bleeding point is as follows:

< br> 2. You have to look at the circulation pump.

Get over.
koliva 2012-03-26 05:07:57

In my car, the temperature problem of my vehicle was like I said it was red until I went to the repair shop until it turned red. The outside of the revolving pump can be melted.

friends, thank you for your help. I will look at the illustrated diagram and try it on my vehicle. If not, I will circulate the pump as your tafo friend says. Click for your attention. & nbsp;

One more question I will have is the door that we put the water of the vehicle you call the expansion vessel? I don't know ???

[QUOTE = madara] I have one more question is the door we put the water of the vehicle you call the expansion vessel? I don't know ??? [/ QUOTE]

Yes it is.

arrow. Thank you, I will look at the appropriate time. if it allows snowing :)

[QUOTE = madara] ok. Thank you, I will look at the appropriate time. of course if it allows snow :) [/ QUOTE]

Where are you from? If you fill in the relevant fields from your profile information, we will have a better idea. Reviews

I am from Bitlis. yesterday, it was snowing again, so I said snowfall. By the way, I saw my profile information missing, but I couldn't fix it. & nbsp;

[QUOTE = madara] I am from Bitlis. yesterday, it was snowing again, so I said snowfall. Meanwhile, I saw my profile information missing, but I couldn't fix it. & nbsp; [/ QUOTE]

I changed it < img src = "smileys / smiley1.gif" border = "0" alt = "Smile" title = "Smile" />

tşkler. bless your hands. I was going to say the air of the car with your touch ... & nbsp; :) joke, thank you.

While idling, I opened the bleed plug on the pipe going to the heating pipe, but water was coming very drop by drop. and stay with pleasure ..

If the circulation pump is malfunctioning, I ate the quince .. I have read that it is a piece that is very difficult to remove.

[QUOTE = delice48] While idling, I opened the bleed plug on the pipe going to the heating pipe, but the water was coming very drop by drop. ?
Stay pleasant and enjoyable.

As if it is not for now .. the temperature indicator is just over 90, I can go a little longer and write a healthy answer .. did you open the breather plug? While the car is at idle, there is a lot of water drops or is it normal? I would appreciate if you answer this question.

[QUOTE = delice48] While idling, I opened the bleed plug on the pipe going to the heating pipe, but the water was coming very drop by drop. ?
Stay pleasantly and with pleasure ..
[/ QUOTE]

If you do not open the cover of the expansion cabinet, there will be no water outlet as the system cannot get air. As water drops into the nasal drip and keeps it down, like water won't flow. You need to drain water from the plug for a while. Meanwhile, you also need to add water from the expansion vessel. Reviews

Thank you very much for your answer, I did all the things called koliva. I hope the temperature problem has improved. I wish you a good day.