|
|
|
|
206 Temperature Control Panel Lighting Maintenance |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 206 | |
| 08.05.2020 14:04 | # 1 |
 hasimayaz |
|
|
Peugeot 206 Temperature Control Panel Lighting Maintenance
|
|
| 08.05.2020 14:04 | # 2 |
 Can Duzyatan |
|
|
Since the bulbs in the place I have marked are not lit, I have to remove the air conditioning adjustment part. Do I need to completely remove the front instrument console?  Isn't there a simpler way, guys? Thank you.   |
|
| 08.05.2020 14:04 | # 3 |
| hasimayaz |
|
|
No way bro. First you will remove the cover of the top LCD panel by hand (with nails, the back will come out first) Then you will remove the radio (the tricks of removing the radio are in the how-to section on the forum) then the top 2 screws holding the edge trim will be removed. Starting from the top, move the bar downwards from its nails. Now you can pull the control panel from the two screws on the front and pull it towards you. you can see the rotating sockets for each bulb from behind. You don't need to remove the panel completely. All you have to do is swipe enough.
|
|
| 08.05.2020 14:04 | # 4 |
 by_sertan |
|
|
which is really hard. In me, the light in the temperature cold part burst. Until I reach that light, I disassembled exactly like that. But he took me out of the light and replaced him with a new one. I can say that the light is the smallest light used in the vehicle. it is so small. thanks for sharing. Useful information for those who do not know.
|
|
| 08.05.2020 14:04 | # 5 |
 maestro |
|
|
Do friends have to describe how to remove the air conditioner buttons and the cover on the surface under the buttons (the cover with the marks on it)?
|
|
| 08.05.2020 14:04 | # 6 |
| maestro |
|
|
+
|
|
| 08.05.2020 14:04 | # 7 |
 ßaris |
|
|
nice sharing thanks.
|
|
| 08.05.2020 14:04 | # 8 |
 Bartender42 |
|
|
Master, This is what I Needed for. Is there a value and brand of the light bulb that appears in the last picture fitted for this lighting? I guess those bursts do not burn at all, and the front fog and the rear lights did not open whatever I did and they do not burn, I wonder where is the problem? They look open on the arm, but they do not burn: S
|
|
| 08.05.2020 14:04 | # 9 |
 ByHack |
|
|
It has been a beneficial work for the master hands ...
|
|
| 08.05.2020 14:04 | # 10 |
 oguzhan29 |
|
|
thanks for sharing it has been good work
|
|
| 08.05.2020 14:04 | # 11 |
 mert.3322 |
|
|
++ Do we have to remove the circulation arm to separate the black surface and the white part on the air conditioner panel. I couldn't take off the circulation arm
|
|
| 08.05.2020 14:04 | # 12 |
 sonerkyl |
|
|
[QUOTE = mert.3322] ++ Do we have to remove the circulation arm to separate the black surface and the white part on the air conditioner panel. I couldn't take off the circulation arm [/ QUOTE] pull the piece at the end of the arm. then there are 4 tabs on the top and bottom of the panel, and when you save them, the black part is coming.
|
|
| 08.05.2020 14:04 | # 13 |
| mert.3322 |
|
|
I solved the problem, thank you, I opened the panel, the middle key was out of place, I put it in place and closed it, it works smoothly, but my lights are gone, I guess there was no contact
|
|
