|
|
|
|
206 Tape |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 | |
| 08.05.2020 19:11 | # 1 |
 debug |
|
|
Greetings 2005 206 XT I have I said that I will change the cassette player of the vehicle recently. I disassembled and installed another tape, but the tool does not work :) It works when you plug in your own tape again. It gives "Engine immobilizer fault" error and trebles in a high-pitched way. Also, after that day, the doors do not open and close from the control. Can't we plug in another tape to these cars? :) The controller may have caused the problem? Thanks in advance
|
|
| 08.05.2020 19:11 | # 2 |
 Alicilik |
|
|
Did you make a reverse connection that came to mind?
|
|
| 08.05.2020 19:11 | # 3 |
| debug |
|
|
[QUOTE = Recipient] Did you make a reverse connection that came up with something? [/ QUOTE] I don't think we do anything wrong. So I put on the other tape worked :) But when the car did not work then it worked again when it was installed. There is nothing wrong with the remote control right now. I think the brain you call Bsi now they want 300-400 lira for it to come out. |
|
| 08.05.2020 19:11 | # 4 |
 ayz_55 |
|
|
Did you connect the same socket with the original ISO socket of the vehicle and the socket you just bought?
|
|
| 08.05.2020 19:11 | # 5 |
| debug |
|
|
[QUOTE = ayz_55] Did you connect the same socket with the original ISO socket of the vehicle and the same socket with the new socket, to the new tape? [/ QUOTE] No, I cut the cable in that way, I checked it directly from the battery. I tied it up, let's get the tape running but the car doesn't work: D
|
|
| 08.05.2020 19:11 | # 6 |
 samet206 |
|
|
There is no relation to the operation of the vehicle with the tape, 206 or any other type of tape goes. |
|
| 08.05.2020 19:11 | # 7 |
| debug |
|
|
3 4 times I tracked the tape in all of them, when I connected the original tape back, the car worked without any problems, even after 1 month, I did not have any problems, the only problem was that the remote control did not work ... the tape was working without any problems. Shouldn't he have to repeat the problem of not working if there was a problem in the brain? He never even warned
|
|
| 08.05.2020 19:11 | # 8 |
| samet206 |
|
|
Bsi also does not make a situation such as not working if it is a problem, nonsense means the vehicle from various places.BSI problematic vehicle does not work. If there is no problem, the door motor is broken, that face is not closing. |
|
| 08.05.2020 19:11 | # 9 |
| suppor |
|
|
I have a 206 xt diesel in 2004, I changed the tape myself. There were 2 sockets in the old tape. I think you made a mistake in cutting work
|
|
| 08.05.2020 19:11 | # 10 |
 MertKurt |
|
|
my advice for remote control malfunction, long press on the red central lock button in the center console. 
|
|
| 08.05.2020 19:11 | # 11 |
 Adem Kurtuldu |
|
|
The same happened to my friend's 206, the immobilizer cable was damaged, it is likely the same.
|
|
| 08.05.2020 19:11 | # 12 |
| debug |
|
|
I'll try the button job tonight :) Is the immobilizer cable entering the tape? We cut 2 pieces of cable already from tape :)
|
|
| 08.05.2020 19:11 | # 13 |
| debug |
|
|
I installed another tape, the sockets of which are the same as the original tape. It works without any problems ... The control job was still unresolved. We got it done for free. It turns out that when we changed the original tape, it was necessary to code ... For your information. :)
|
|
| 08.05.2020 19:11 | # 14 |
| debug |
|
|
Let me write something about the battery. No click in the car, I tried to start a starter 6-7 times. Self-wiping fln is running starter. When I make 100 fln, it comes to 10-20, but you should be aware of the battery problem.
|
|