206 Symptom of 2nd stage fan failure - 206

I am new among your friends, I am a peogeot 206 user, 2001 model 1 and 2 I read that there is a ked fan event on the internet.

The warning gives my teacher over temperature 110 degrees, I have to open 2 levels. It is active when you turn on the air conditioner 2 steps.

I mean, wouldn't it give a point without overheating 110

What kind of warning does it give, for example

engine malfunction lamp is on, sir.

Fault lamp stop what you call my teacher

[QUOTE = sonerkyl] engine malfunction lamp is on, sir. [/ QUOTE]

is this the same for all models?

[QUOTE = dou] malfunction stop my post, my teacher [/ QUOTE]

If the fan does not open, it will overheat and stop will flash. It gives an audible warning.

You can see if the second stage of the fan is working by turning on the air conditioner. A little after the air conditioner is turned on, the fan runs on Stage 2.

My fan rollers made oxide. Sometimes it wasn't opening. The temptation suddenly rose to red. The stop sign was blinking on the screen and he was sitting saying loudly. After 5 seconds, the temperature was returning to normal. Finally, one day he went completely. I learned that our vehicles have a feature like this. When the temperature is red, the brain thinks there is a malfunction, disables the fan role and gives the electricity directly to the fan. And even if the role is broken, the fan is running.

The last time I turned on the air conditioner, when I realized that strange noises were coming from the air conditioner and it was not cooling, I solved the event.

Fan roles of 206 are very suitable to take water and oxide. Even if there is no problem, it is necessary to check in between.

Let me describe its location as follows. There is a black box when you remove the part where the front logo and grille are located. There are two green roles in it, one is fan role and the other is air conditioner role. When it is removed, it can be seen whether it makes oxide or not.

The role of the fan roles is to command the fan according to the motor temperature, enabling the 1st Stage and 2nd Stage fans to be turned on.

talip206 2018-05-11 23:12:02

Thank you, thank you. I guess this defect happened to me. I guess the same has changed the thermostat on the highway.

https://forum.peugeotturkey.com/forum_posts.asp?tıd=30517&title=206-fan-rolesi-nasil-degistiril is

You can reach the roles from the link. If there is oxidation, the part is cheap. Roles that appear green. upper fan role lower air conditioner roller

talip206 2018-05-12 01:24:41

the first name will be to check them

It is possible that Moses is in a time, it means that the 2 stage is malfunctioning, it was raining that day.

08.05.2020 20:52	# 6
x571
[QUOTE = sonerkyl] engine malfunction lamp is on, sir. [/ QUOTE] is this the same for all models?

	206 Symptom of 2nd stage fan failure
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206

08.05.2020 20:52	# 2
sonerkyl
The warning gives my teacher over temperature 110 degrees, I have to open 2 levels. It is active when you turn on the air conditioner 2 steps.

08.05.2020 20:52	# 7
talip206
[QUOTE = dou] malfunction stop my post, my teacher [/ QUOTE] If the fan does not open, it will overheat and stop will flash. It gives an audible warning. You can see if the second stage of the fan is working by turning on the air conditioner. A little after the air conditioner is turned on, the fan runs on Stage 2. My fan rollers made oxide. Sometimes it wasn't opening. The temptation suddenly rose to red. The stop sign was blinking on the screen and he was sitting saying loudly. After 5 seconds, the temperature was returning to normal. Finally, one day he went completely. I learned that our vehicles have a feature like this. When the temperature is red, the brain thinks there is a malfunction, disables the fan role and gives the electricity directly to the fan. And even if the role is broken, the fan is running. The last time I turned on the air conditioner, when I realized that strange noises were coming from the air conditioner and it was not cooling, I solved the event. Fan roles of 206 are very suitable to take water and oxide. Even if there is no problem, it is necessary to check in between. Let me describe its location as follows. There is a black box when you remove the part where the front logo and grille are located. There are two green roles in it, one is fan role and the other is air conditioner role. When it is removed, it can be seen whether it makes oxide or not. The role of the fan roles is to command the fan according to the motor temperature, enabling the 1st Stage and 2nd Stage fans to be turned on. talip206 2018-05-11 23:12:02

08.05.2020 20:52	# 10
dou
the first name will be to check them It is possible that Moses is in a time, it means that the 2 stage is malfunctioning, it was raining that day.