206 Sunroof Engine Repair |
|
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206 |
08.05.2020 16:51 | # 1 |
tigerland | |
When it is closed, it continues to work while the button is pressed. For this reason, the gear stands out. & Nbsp; http: / I talked to /www.aftekin.com/ & nbsp; and they said we would make 100 TL, you just use the engine. & nbsp; Is the price good for you? will change and switch .. & nbsp; Let me share with you in detailed pictures .. & nbsp; < img src = "http://i1077.photobucket.com/albums/w461/koton3/DSCF8091.jpg" border = "0" /> |
08.05.2020 16:51 | # 2 |
koliva | |
There may be black rectangular shaped parts on the so-called switch. There are 2 peeps, one may report a complete shutdown and the other may report a full emergency. |
08.05.2020 16:51 | # 3 |
tigerland | |
[QUOTE = koliva] There may be black rectangular shaped pieces on the eye when it says Switch. It looks like it is two, one of them may be in full shutdown and the other is reporting of emergency. [/ QUOTE] is exactly the same :) There is a small stick inside the green wheel. I have to test now, the switches are intact, probably broken, because even if I turn off, the engine is running out of teeth. & nbsp;
|
08.05.2020 16:51 | # 4 |
koliva | |
They are very hard to break, but test it of course. I saw it somewhere else than the same switches, but I can't remember where it was. & Nbsp;
|
08.05.2020 16:51 | # 5 |
tigerland | |
[QUOTE = koliva] They are hard to break, but test it of course. I saw it somewhere else than the same switches, but I can't remember where it was. & Nbsp; [/ QUOTE] thanks for the explanation aykut brother. & Nbsp; if you pay attention, there are 2 cables in the switches but one of them is broken :) my solder is broken so the electricity cutting. as I found the problem but now the gear needs to change :)
|
08.05.2020 16:51 | # 6 |
Guests | |
206_XS & nbsp; I received the lamps today thanks send it if you want Let me look at it, maybe I can fix it, but I will not promise, but its cost does not exceed 20, 100 is not very much. assembled, it would be nice if you take it in detail (I am in Azerbaijan on the weekend, but it will be the Tuesday of return, set yourself to that day)
|
08.05.2020 16:51 | # 7 |
tigerland | |
thanks. Switches are working but I think there is a setting for this. What did the program say? The company stops when opening it back, but it stops when it closes. Press the button once again should not work, but it still works. Is there a switch setting mm?
|
08.05.2020 16:51 | # 8 |
toga406 | |
Get well soon
|
08.05.2020 16:51 | # 9 |
tigerland | |
[QUOTE = toga406] get past [/ QUOTE] Thank you :) do you have any sunroof :))
|
08.05.2020 16:51 | # 10 |
EmSul | |
I will be hooking the subject, but did my teacher solve this switch and gear problem of this sunroof? the female does not stop when it closes;
|
08.05.2020 16:51 | # 11 |
soner09 | |
How do you take that plastic piece out
|
08.05.2020 16:51 | # 12 |
dijitalize | |
The same problem started with me the other day, it doesn't stop when it closes.
|
08.05.2020 16:51 | # 13 |
soner09 | |
Walla I sent you aftekın yesterday I couldn't reach it with cargo anymore
|
08.05.2020 16:51 | # 14 |
dijitalize | |
They called from the authorized service, they charged 400TL including workmanship, they could replace the parts such as repair kit and belt system. I couldn't fully understand the phone.
|
08.05.2020 16:51 | # 15 |
soner09 | |
they made mine 150 tl inside the plastic mechanic komurler bild something else said 150 tl
|
08.05.2020 16:51 | # 16 |
dijitalize | |
I bought the car in the morning, they wrote that they repaired the repair kit, their springs, a part in the drive motor, only realized something like this, when the sunroof is opened, it stops 10cm before it is fully opened. it closes to the pressure again. Do you? div>
|
08.05.2020 16:51 | # 17 |
soner09 | |
my original ole brother 2 levels painful closing, no trouble keep it inside :)
|
08.05.2020 16:51 | # 18 |
dijitalize | |
yes I did some research on the internet, mentioned in 206 booklets, they made a first step called "comfort position", maybe I did not notice this level or it was not failing, it did not stop at the level, interesting ...
|
08.05.2020 16:51 | # 19 |
soner09 | |
I mean, when it made the malfunction, it went back to the original.
|
08.05.2020 16:51 | # 20 |
SDYMZ | |
I have a sunroof, I did not need any maintenance. Bide, how do you disassemble that piece?
|