206 STOP WHEN GOING ON HDI WAY NOT WORKING

While my 206 diesel vehicle is in a stop, it stops working spontaneously as if it was not kicking the diesel, it was working in the past. Can anyone help if they have a reasonable idea

If the bump is doing after passing through the ground, the impact sensor may be sensitive.

No, my master car is low, they probably canceled the impact sensor, but when driving on the normal highway, the fuel cuts off the bidet.

I think the diesel pump seems to be malfunctioning, it seems like it cannot grow the diesel as the speed increases or the engine loads. Over time, the pressure value of the pump may decrease. First, measure the pressure of the diesel pump. The crank sensor may also be faulty, it may misread the engine speed and send different signals to the brain. If I were, I would first measure the pressure at low-high speeds and replace the crank sensor if there was no error in the pump.

Sir, I had the same gasoline in 206. My flywheel sensor changed first. But when we said the breakdown was relieved, we encountered the same problem. The problem was in the engine electrical installation, I completely renewed. We are very happy now, we are very happy :)

Is it because of the stopping matter on the road master

My brother, you speak very logically, as you might say, because there is no question of stopping while traveling in the city, only when the highway forces the engine in the e5 style roads, that is, it stops at 100 120 130 speeds.

Mine was sometimes standing still. As if there is a problem with your diesel pump ..

Is there any oddity in the shake-misfire engine since it starts the car first?

motor jerky running not working properly motor shaking quite a bit

I think your problem is injector

Does the car give a warning sound before stopping, I have been dealing with the same problem for 2 months.

no master hicbisey no complete going everything

Hi there 2004 HD 206 did the same problem

The same incident happened to me when the sensor on the diesel pump was broken, it stopped when it was heated, the pump master connected it to the computer and said there was a crouch. I changed this day 150 TL get well soon