206 Steel Wheel Aid ...

Hello friends. 206 1.4 I look at my car with steel rim-tire I was very unstable in inches. I don't like the tire gap, actually. I think that's why the big rim is like 16 inches but I'm afraid it will tire the car. but I definitely do not want to step on the ground and rub on the ground in every hole,
If I summarize briefly, I don't like the tire gaps, as I said, how can I fix this, thanks in advance for your help. I hope Allah does not cause any trouble.

I don't like the same situation. I will change the wheels at the first opportunity. I will never get into the Sagittarius event. The states of the roads are clear. I have 15 inch wheels in my mind. I think more is more.

Dude definitely 16` 9-spoke gti rim and 205/45/16 size tire

Is it visual?
Conform?
Is it both visual and comfort?
Are you going to use sapor with a bow?
With original springs?

I keep going with 14 inch wheels in order not to spoil the original.

[QUOTE = expert_emre16] Dude definitely 16` 9 spoke gti rim and 205/45/16 size tire [/ QUOTE]

Does the master force the vehicle so hard? Or rubbing doesn't do anything, right?

I do not recommend pressing the tool. Trying to keep the 15 most ideally close to the values written on the door, without wanting to expand the tire in 16 rims. Although I used gti, I did not stop protecting the vehicle's values. I used 195/50/15 by keeping up with the factory values of 185/55/15 and I would recommend 195/55/15 wheel tires. you will not lose much comfort. It does not bother you in the space between.

brother good day first of all i was very undecided but i bought peugeot 206 cc rim 195 50 15 tire and eibach prokit spring set if you want both image and comfort i would recommend this combination

[QUOTE = candanxyz] Is it visual?
Conform?
Is it both visual and comfort?
Are you going to use sapor with a bow?
With original springs? [/ QUOTE] 06GSN77 2013-06-08 15:26:21

[QUOTE = 06GSN77] Hello friends. 206 1.4 I look at my car with steel rim-tire I was very unstable in inches. I don't like the tire gap, actually. I think that's why the big rim is like 16 inches but I'm afraid it will tire the car. but I definitely do not want to step on the ground and rub on the ground in every hole,
If I summarize briefly, I don't like the tire gaps, as I said, how can I fix this, thanks in advance for your help. I hope Allah does not cause any trouble. [/ QUOTE]

Sir, if I think the space between the hood you call the space and the tire. You cannot change it unless you press the tire sidewall or vehicle.
I say for 206;
165/70/13 for 13 "
175/65/14 for 14 "
For 15 "185/55 / 15-195 / 55 / 15- 185/50 / 15-195 / 50/15
For 16 "195/45 / 16-205 / 45/16
205/40 / 17-205 / 35/17 for 17 "

tire sizes can be used. There are very small fluctuations when all these dimensions are comparable to the outer diameters. The distance of the middle of the wheel to the hood and the ground does not change much.

If I say that I will not necessarily fill the hood space

1- Using a tire size such as 175/75/14 when using the tire sidewall, for example, 175/65/14, will close this gap, but this will make a radial expansion, so the possibility of rubbing around will increase.

2- Using a bow. The spring is purely to bring the hood closer to the middle of the wheel. There is no change between the wheel and the ground and the edges. It is a two-way change - more or less.

3- Making skirts to hoods. Blowing or skirt dressing (sometime there were citroen) applied to these gti vehicles can be done but I don't know is it worth it?

I can say that you have answered all the questions in my head.I think it will be the most logical sports bow if we start from what they say now.

195/50/15 5 cm front to the front, the back torque is one tooth down. No need to pass the bumps, it will be the ideal image you want.

I think you are talking about the shortcut event you call torsion, I am not very hot about it because it is not welcomed because the shortcut job

do not take the tooth of the torch down by one tooth.

It may be logical in that way. Thanks for your opinion;)

First of all, if you are not going to use a spring and sports shock absorber, the 16-inch rim would be very absurd, like a pumpkin. You can fill that gap using a spring, but it is not filled, by pressing the tool. If you are uncomfortable with that space, if you do not think of a spring, if you want comfort, do not play with the rim size with certainty.
samet206 2013-06-08 22:16:38

I am not saying I will not use it, if it is necessary to turn it off, I will use it, just asking because I do not know what to do. Many thanks for the comments.

Guys, first of all, thank you all. I had a 15 inch 5-arm replica pejo rim, and my tire size 195/50/15 lassa brand tire was used, I can say that the gap between the tire and the hood is closed a little. Of course, if I use a spring, it will be a better image. Very good handling in terms of comfort, more robust, same in brakes ... As soon as I add it to the subject as a picture, good forums for everyone

Who is using a 3.5 cm spring, is there any picture? or is he happy?

It would be nice if you can help about 3.5 or 5 cm :)