Peugeot Forums - Peugeot Fan Club

206 speaker removal - refitting

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 16:29 # 1
Bugra
friends, I do not know that such issues have been opened before, but ... I want to disassemble the car's speakers and replace them with more. But is it necessary to remove the door trim completely to replace the speaker I want to ask you, or does the grille-like coating come out on the speakers? Thanks in advance for suggestions and advice. . "Clap"
08.05.2020 16:29 # 2
yavuz25
Complete removal of "Wink" If it is completely disassembled, it is easier to do business. Why do you change it if there is no problem?
08.05.2020 16:29 # 3
aspirinxlarge
No, I don't think it is necessary. If you insert a flat screwdriver into the grill-like thing you're talking about, it turns out directly. & Nbsp;
08.05.2020 16:29 # 4
yavuz25
[QUOTE = aspirinxlarge] No I don't need it If you insert a flat screwdriver and screw it on the grid-like thing you're talking about. & Nbsp; [/ QUOTE]
comfortably reached behind the cable and speaker. "Ermm"
08.05.2020 16:29 # 5
wildstar
I do not know that & nbsp; is the same in every series, but last time I removed all door spandes for both speaker replacement and heat and sound insulation. The grill you mentioned was riveted from the back to the pandzos. & Nbsp;
08.05.2020 16:29 # 6
yavuz25
[QUOTE = wildstar] I don't know that & nbsp; is the same in every series, but last time I removed all the door spandes for both speaker replacement and thermal and sound insulation. The grill you mentioned was riveted from the back to the sponge. & Nbsp; [/ QUOTE]
it is when I know it. gif "height =" 17 "width =" 17 "border =" 0 "alt =" Wink "title =" Wink "/>
08.05.2020 16:29 # 7
Bugra
I want to get quality sound without disturbing the original condition of the vehicle. I am thinking to install better quality of the speakers that are coming out + there is a cracked crack in the speakers.
08.05.2020 16:29 # 8
Bugra
as I understand it is not possible to remove the rivet by proving it from the outside.
08.05.2020 16:29 # 9
yavuz25
[QUOTE = bugrature] I want to get quality sound without disturbing the original condition of the vehicle. I am thinking to install better quality of the speakers that are coming out + there is a cracked crack in the speakers. >
I said that if there is not a lot of defect, make a reinforcement, but it is broken. You think about a few cm. 17 "width =" 17 "border =" 0 "alt =" Wink "title =" Wink "/>
08.05.2020 16:29 # 10
yavuz25
[QUOTE = bugrature] as far as I understand it is not possible to remove the rivet by proving it from the outside. In terms of = "http://forum.peugeotturkey.com/smileys/smiley2.gif" height = "17" width = "17" border = "0" alt = "Wink" title = "Wink" /> pi.
08.05.2020 16:29 # 11
Bugra
I WILL TAKE THE SAME AGAIN. ÖNLER ORJ 16` FROM 13` IN THE BACKGROUND FROM THE LEARN FORUM & nbsp;
08.05.2020 16:29 # 12
Bugra
I think it seems that the door trim will be completely removed! thanks for the advice .. & nbsp;
08.05.2020 16:29 # 13
wildstar
So let me give you a little advice like this. I bought the Pioneer deh-2350ub tape 10 days ago, without removing the front 16 "originals, and 13" on the back doors, it was not what I wanted. Instead of attaching anything to the rear doors without breaking the front again, and the odor 2 speakers or two 16 "speakers on the luggage pendulum, try it, measure the sound after that. I think the speakers you attach to the rear doors are not working :) I now remove the rear doors & nbsp; I will attach the oval or 16 "to the trunk sponge, and try to" pioneer 16 "if I do not get efficiency. wildstar 2011-12-26 17:35:13
08.05.2020 16:29 # 14
gurcan42
I have replaced the front and rear speakers before. You have to remove the door face.
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”