206+ Sound system help - Peugeot Sound Systems

Hello there. Yesterday I bought 2011 model 206+. But I never liked the sound system. I would like to set up a "system with my limited budget" using the original tape of my tool, "where I can get bass tones in low sounds, not too exaggerated." Before I did that, I wanted to consult with you guys.

First of all, can the software to activate the AUX connection be thrown on my tape at the authorized service? If not, would you suggest an alternative way to make my AUX connection?

I think I have to use the RCA-Amp converter to connect my original tape to the amplifier. Does the following product work? (When I enter the settings of my tape, I cannot adjust the front-to-rear audio distribution. This means that my speaker has no rear speaker defined / no rear speaker output. Does it cause problems?)

http://www.sahibinden.com/ilan/yedek-parca-aksesuar-donanim-tuning-kablo-aksesuar-ma-audio-tetikleyicili-amfi-donusturucu-31003959/detay/

I think about it as a set.

Amplifier: Roadstar RDA 6040 Amp 4-channel 2400 Watt

Front Speaker: Pioneer TS-G172Ci 16cm mid kit 280 Watt 45 Watt RMS

Rear Speaker: Pioneer TS-G 1344 R 13cm 220 Watt

Woofer: Pioneer TS-W310 1000 Watt 30 cm

I plan to install the system "myself" in this way. Can I connect all the speakers to the amplifier on the set? Does it remove the amp? (As I said earlier: I don't plan to listen to the last sound, blast music.)

[QUOTE = Ráskai] Hi. Yesterday I bought 2011 model 206+. But I never liked the sound system. I would like to set up a "system with my limited budget" using the original tape of my tool, "where I can get bass tones in low sounds, not too exaggerated." Before I did that, I wanted to consult with you guys.

Have a good vehicle. I hope you will be satisfied using it. We try to help, but if you introduce yourself and your car in the relevant sections, we will help you more easily.

First of all, can the software to activate the AUX connection be thrown on my tape at the authorized service? If not, would you suggest an alternative way to make my AUX connection?

There is no aux option in 206+ tapes. Only CD output can be activated. You have to activate it and add a piece in between. There are devices with usb-aux-sdkart socket on the market. Serkan knows, I forgot his name. You can use it.

http://www.sahibinden.com/ilan/yedek-parca-aksesuar-donanim-tuning-kablo-aksesuar-ma-audio-tetikleyicili-amfi-donusturucu-31003959/detay/

You can convert the original tape outputs to amplifiers. There is a related change in the tape menu in the service. No need to buy a dialer.

They open the fader setting from the related menu.

If RDS is off, they should adjust the region to western Europe and activate RDS.

I think about it as a set.

Amplifier: Roadstar RDA 6040 Amp 4-channel 2400 Watt

Front Speaker: Pioneer TS-G172Ci 16cm mid kit 280 Watt 45 Watt RMS

Rear Speaker: Pioneer TS-G 1344 R 13cm 220 Watt

Woofer: Pioneer TS-W310 1000 Watt 30 cm

Beautiful pieces work.

Don't worry that amp will remove all the tracks. Front and rear speakers to two channels. The bass will also bridge and connect two channels. Pay close attention to the cables. Use quality cables, do the insulation well and do not take the electric-audio cables together.

And if you need a document such as how to disassemble it etc. let me know and let me share the relevant service documents.

In addition, it can still help if you consider cruise control.

[/ QUOTE]

First of all, thanks for your quick response Smile

[QUOTE = Acquisition]

It's called "Digital CD Changer" on the Internet. I researched briefly, I had to buy the 8-pin one and the sound quality was fine. But the price is around 130TL, almost tape money. In order not to spoil the originality of the vehicle, I will buy this piece now either zero or second hand.

You can convert the original tape outputs to amplifiers. There is a related change in the tape menu in the service. No need to buy a dialer.

They open the fader setting from the related menu.
If RDS is off, they should adjust the region to western Europe and activate RDS.

How the tape outputs can be turned to the amp, I do not understand it. An update will be made in the service for RDS and Fader settings; how long does it cost me to get this done?

Beautiful pieces work.

I say whether the front is 16 or the back is 13, if I replace the back 13 with an oval in panzidota, what do you think?

[/ QUOTE]

You're welcome,

In fact, its original Dension kits but they are very expensive. 150 dollars only usb lisi 250 dollars bluettohlus.

Sold in the market, lower-class products can be preferred sound quality is not bad. I said that I will return to the original tape with something like that for a while, but the track names do not appear, I need to throw a limited and procedural song.

Not an update, they will change the current settings, all in one menu. There is an option called audio output, that speaker is selected and you will make it an amplifier. There is a zone setting at the top. fader can be opened in the same section.

I prefer Pandizota oval.

basically, 5 minutes of easy operation I can do even while I am on the road: D but I do not know what the service wants I had it for free while under warranty.

Let me explore the Aux business in more detail. The AUX feature will work for me, not the USB / SD feature of the device I'm talking about. If I find a more reasonable solution that will only solve AUX, I will share it with friends on the forum.

After making a price research for audio equipment, I will pass the order, and get rid of bad sound as soon as possible;)

I do not understand the setting issue clearly, I throw PM.

I will be glad if friends who have different opinions on the subject give their opinions.

If you want Pioneer oval 600wat speaker, I have it

I help at the price

http://www.sanalpazar.com/pioneer-ts-a6995s-600wat-max-oval-hoparlor__isp11663426

[QUOTE = gngburak] If you want Pioneer oval 600wat speaker, I have it

I help at the price

http://www.sanalpazar.com/pioneer-ts-a6995s-600wat-max-oval-hoparlor__isp11663426

[/ QUOTE]

Unfortunately, I plan to buy the whole set as one place and zero. Thanks for your attention anyway. If my mind changes, I will contact you again.

[QUOTE = Raskaa] [QUOTE = gngburak] I have it if you want Pioneer oval 600wat speaker

I help at the price

http://www.sanalpazar.com/pioneer-ts-a6995s-600wat-max-oval-hoparlor__isp11663426

[/ QUOTE]

Unfortunately, I plan to buy the whole set as one place and zero. Thanks for your attention anyway. If my mind changes, I will contact you again.

[/ QUOTE]

arrow

08.05.2020 18:02	# 2
Alicilik
[QUOTE = Ráskai] Hi. Yesterday I bought 2011 model 206+. But I never liked the sound system. I would like to set up a "system with my limited budget" using the original tape of my tool, "where I can get bass tones in low sounds, not too exaggerated." Before I did that, I wanted to consult with you guys. Have a good vehicle. I hope you will be satisfied using it. We try to help, but if you introduce yourself and your car in the relevant sections, we will help you more easily. First of all, can the software to activate the AUX connection be thrown on my tape at the authorized service? If not, would you suggest an alternative way to make my AUX connection? There is no aux option in 206+ tapes. Only CD output can be activated. You have to activate it and add a piece in between. There are devices with usb-aux-sdkart socket on the market. Serkan knows, I forgot his name. You can use it. I think I have to use the RCA-Amp converter to connect my original tape to the amplifier. Does the following product work? (When I enter the settings of my tape, I cannot adjust the front-to-rear audio distribution. This means that my speaker has no rear speaker defined / no rear speaker output. Does it cause problems?) http://www.sahibinden.com/ilan/yedek-parca-aksesuar-donanim-tuning-kablo-aksesuar-ma-audio-tetikleyicili-amfi-donusturucu-31003959/detay/ You can convert the original tape outputs to amplifiers. There is a related change in the tape menu in the service. No need to buy a dialer. They open the fader setting from the related menu. If RDS is off, they should adjust the region to western Europe and activate RDS. I think about it as a set. Amplifier: Roadstar RDA 6040 Amp 4-channel 2400 Watt Front Speaker: Pioneer TS-G172Ci 16cm mid kit 280 Watt 45 Watt RMS Rear Speaker: Pioneer TS-G 1344 R 13cm 220 Watt Woofer: Pioneer TS-W310 1000 Watt 30 cm Beautiful pieces work. I plan to install the system "myself" in this way. Can I connect all the speakers to the amplifier on the set? Does it remove the amp? (As I said earlier: I don't plan to listen to the last sound, blast music.) Don't worry that amp will remove all the tracks. Front and rear speakers to two channels. The bass will also bridge and connect two channels. Pay close attention to the cables. Use quality cables, do the insulation well and do not take the electric-audio cables together. And if you need a document such as how to disassemble it etc. let me know and let me share the relevant service documents. In addition, it can still help if you consider cruise control. [/ QUOTE]

08.05.2020 18:02	# 3
Raskaa
First of all, thanks for your quick response [QUOTE = Acquisition] There is no aux option in 206+ tapes. Only CD output can be activated. You have to activate it and add a piece in between. There are devices with usb-aux-sdkart socket on the market. Serkan knows, I forgot his name. You can use it. It's called "Digital CD Changer" on the Internet. I researched briefly, I had to buy the 8-pin one and the sound quality was fine. But the price is around 130TL, almost tape money. In order not to spoil the originality of the vehicle, I will buy this piece now either zero or second hand. You can convert the original tape outputs to amplifiers. There is a related change in the tape menu in the service. No need to buy a dialer. They open the fader setting from the related menu. If RDS is off, they should adjust the region to western Europe and activate RDS. How the tape outputs can be turned to the amp, I do not understand it. An update will be made in the service for RDS and Fader settings; how long does it cost me to get this done? Beautiful pieces work. I say whether the front is 16 or the back is 13, if I replace the back 13 with an oval in panzidota, what do you think? [/ QUOTE]

08.05.2020 18:02	# 4
Alicilik
You're welcome, In fact, its original Dension kits but they are very expensive. 150 dollars only usb lisi 250 dollars bluettohlus. Sold in the market, lower-class products can be preferred sound quality is not bad. I said that I will return to the original tape with something like that for a while, but the track names do not appear, I need to throw a limited and procedural song. Not an update, they will change the current settings, all in one menu. There is an option called audio output, that speaker is selected and you will make it an amplifier. There is a zone setting at the top. fader can be opened in the same section. I prefer Pandizota oval. basically, 5 minutes of easy operation I can do even while I am on the road: D but I do not know what the service wants I had it for free while under warranty.

	206+ Sound system help
• Homepage » PEUGEOT MODIFIED PLATFORM » Peugeot Sound Systems

08.05.2020 18:02	# 6
gngburak
If you want Pioneer oval 600wat speaker, I have it I help at the price http://www.sanalpazar.com/pioneer-ts-a6995s-600wat-max-oval-hoparlor__isp11663426