Peugeot Forums - Peugeot Fan Club

206 rims

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 20:12 # 1
Ysf206
Hello pejo users, I use 206 sedan 2009 1.4 gasoline, the original rims of my car are 185.65.14 rims instead I bought 16 * 7 25 ht wheels, I think it should be tire tires 195.50.16 but I think it may be a master but I will wear 195.45.16. cheek do you think I'm waiting for your comments
08.05.2020 20:12 # 2
maximusti
I increased from 14 "to 16", I reduced the tire sidewall from 65 to 55,
There is no problem in front of them, but two people rub on the back seat.
45 50 may not rub on the cheek.
08.05.2020 20:12 # 3
Ysf206
the best one is to get 45, but 55 hears a little bit 195 mi width or 205 mi


08.05.2020 20:12 # 4
tezmert
if you have not used the thin cheek before, be careful because the rim hits the tire in the smallest hole. beware.
08.05.2020 20:12 # 5
Ysf206
I am thinking of using 195.45 or 50, but if there are previous users, it would be good if they gave an idea.
08.05.2020 20:12 # 6
Gokcesel
You have to use 195/45, hodja. You will not have a problem like rubbing.
08.05.2020 20:12 # 7
Ysf206
Hodja 45 cheeks are very small, comfort drops and rubber blows are so quick so I think 50 but if it lasts I will use 45, 45 warranty will not rub I am sure it would be nice if it were a user
08.05.2020 20:12 # 8
Gokcesel
I'm a user, teacher, I used 45 cheeks so I said 45 to you. The size that corresponds to the dimensions of 14 "is 195 / 45/16. It is not too low, comfort falls a little, but I did not react that I got into the pits, the wheel was gone, the tire was neither a balloon nor a damage to the rim.
08.05.2020 20:12 # 9
Ysf206
Well, if my teacher does headlight on fuel, how much does it cost?
08.05.2020 20:12 # 10
Gokcesel
[QUOTE = Ysf206] Well, how much does it cost if my teacher is headlights in fuel [/ QUOTE]

It plays 1-2 krs in km but there is no difference. My car was driving 1050-1100 km in the city.
08.05.2020 20:12 # 11
OguzhanKucuk61
If the original size is 185 / 65r14, the size of 195 / 45r16 will be 2.35% smaller.
In 195 / 50r16 usage, there is an increase of 0.84% in total diameter. Where does a value that is not even 1 percent rubbed?
I think friends wrote the original for vehicles with 175 / 65r14 dimensions.
According to my result with the tire calculation tool;
If your original size is 185 / 65r14
Sizes 205 / 45r16 and 195 / 50r16 are suitable.
205 base 0.84% smaller than the original size
195 base is 0.84% larger than the original size.
If you do not rub, it is more suitable to use 205 base and 45 cheeks. oguzhankucuk61 2017-02-19 02:00:52
08.05.2020 20:12 # 12
Ysf206
Master will get 45 cheeks 195 I have 50 cheeks Ysf206 2017-02-19 10:02:56
08.05.2020 20:12 # 13
prdxy
45 cheeks are available on my 17 inch rims, if you find 50 get off I think you can try it then decide accordingly it makes the most sense
08.05.2020 20:12 # 14
Ysf206
First of all, whether your car is 206 sedan or 17 inch 45 cheek Ysf206 2017-02-19 14:45:51
08.05.2020 20:12 # 15
ersin61
My friend 195/50/16 when the back side is full, the hard left stretches the rubber left side.
08.05.2020 20:12 # 16
Ysf206
Master 45 is small, a little car is already low and low
08.05.2020 20:12 # 17
Gokcesel
Hodja, everyone has written their experiences and possibilities, and you have already decided on 50 cheeks. You can not learn otherwise to buy the most beautiful tire.

Everyone's use is different. I only use it, you use it as a family, my car was recovering 45 flat cheeks, 2 people on the back were rubbing when it got on. It will save 50 of your vehicle will be at its original height. In short, you have to try and see.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”