206 Removing the Boiled Luggage Eraser [PICTURE] - 206

Yes friends, as you know, the rear luggage eraser generally cannot boil and disassemble in the 206s. I do not have a back eraser in my own vehicle, and I could not install it because I could not remove it because of boiling, but they do not want to deal with the repairers.
What you need as a team is very simple;
*Flat screwdriver

* small saw (saw blade wood saw does not matter.) because the material is a light aluminum material, you can easily disassemble it in 5 minutes.

First we unscrew the nut on it.

These are our materials ..

And then we cut the outer plastic first. It does not take 3 minutes in total. It is easy to cut and come out.

Our plastic is cut and we take it out.

We cut the side diagonal pass, which is cut in a few minutes by sawdust immediately, as it is a soft material.

We insert a flat screwdriver into the gap we open with the saw and open it apart, as you can see in the picture.

May it be easy for everyone ...

Cyrus35 2016-05-23 13:48:02

Thanks for the helpful sharing.

Handy health useful work ..

Thanks for sharing ... use it on good day ..

Thanks for sharing, I use the product in the link I provided.

http://www.tophanmakina.com/rico-013-rc2005-2-ayakli-mini-cektirme-80x80,pr-2674.html

It is also possible with a puller, of course, but some of you are stubborn, you know that it has not boiled there or it has become a whole. LOL

mine was so :) I first sprayed rust remover then came out easily with puller :) your solution is a practical solution with the materials we have Wink

Just like, brother, it turned out, let me pick it up when I bring a wiper without any trouble and let's see it now :)

buy original sub-industries breaking spring section

Thanks I learned good

Health in your hand has been a useful topic :)

the same problem was with me, I mean the disease is that this spray or spray and thin it out with the file, but a place of trouble is necessary to work fine and delicate with high probability of glass breakage

Hodja, I can say that I was happy with it in 3 minutes. LOL

So there is no need for delicacy, I hit the hammer with the hammer at first. How did I make the mistake? I think about it. Thumbs Up

08.05.2020 19:48	# 3
Cyrus35
You're welcome

08.05.2020 19:48	# 4
ersin61
Handy health useful work ..

08.05.2020 19:48	# 6
okan77
Thanks for sharing ... use it on good day ..

08.05.2020 19:48	# 7
sonerkyl
Thanks for sharing, I use the product in the link I provided. http://www.tophanmakina.com/rico-013-rc2005-2-ayakli-mini-cektirme-80x80,pr-2674.html

08.05.2020 19:48	# 9
sonerkyl
mine was so :) I first sprayed rust remover then came out easily with puller :) your solution is a practical solution with the materials we have

	206 Removing the Boiled Luggage Eraser [PICTURE]
• Homepage » PEUGEOT MODIFIED PLATFORM » 206

08.05.2020 19:48	# 10
Cyrus35
Just like, brother, it turned out, let me pick it up when I bring a wiper without any trouble and let's see it now :)

08.05.2020 19:48	# 11
sonerkyl
buy original sub-industries breaking spring section

08.05.2020 19:48	# 13
Gokcesel
Health in your hand has been a useful topic :)

08.05.2020 19:48	# 14
ARDADOGAN
the same problem was with me, I mean the disease is that this spray or spray and thin it out with the file, but a place of trouble is necessary to work fine and delicate with high probability of glass breakage

08.05.2020 19:48	# 15
Cyrus35
Hodja, I can say that I was happy with it in 3 minutes. So there is no need for delicacy, I hit the hammer with the hammer at first. How did I make the mistake? I think about it.