206 rear speaker help - Peugeot Sound Systems

I think the back speakers of the 2000 model 206m are cracked when I turn on the blast bass a little, I want to sound like a crazy sound system, but when I turn up the sound, I want the sound to crack, I think to change the two as far as I learned, the rear speakers are 13 centimeters, & nbsp;

I'm going to ask, is there any 13cm speakers that I will get stuck here? and I can change it, easy to open the floor, I opened it before but I don't know how the speaker changes

I asked the service to get the original, 2 rear speakers said 22 TL, I will get 40 TL of workmanship.

If you say I can use it in a dull future, my friend can buy a 40 cm tl with 13cm sony column.

[QUOTE = ufuk91] friends, the rear speakers of the 2000 model 206m, I guess they give cracked sound when I open the bass bass a little, I am not an enthusiastic sound system like crazy, but when I turn the sound a little bit, I want the sound to crack, as far as I learned to change the two, the rear speakers are 13 centimeters, & nbsp;

I'm going to ask, is there any 13cm speakers that I will buy? and I can change it, it's easy to open the floor before, but I don't know how the speaker changes [/ QUOTE]

my teacher, you can disassemble it yourself, just make your hand a bit tired.

It can be any 13 cm speaker, but it would be better if you disassemble it and take it accordingly because sometimes the ears used when connecting the speaker to the body may be different.

the connection points of the original speaker to the door sheet are made with rivets. With the help of a screwdriver, you can detach it by removing it.

You can connect the new speaker that you bought in this way. It will be difficult to connect with a rivet so you can fix this problem by getting bolts and nuts suitable for those holes.

original speakers have connection sockets, but they won't be on the new speaker you want, so you can make the connection by getting a bridge before the cable socket.

If you buy original speakers, they will have sockets, so there is no need for them.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & 0 = 0 & 0 = 0"> [QUOTE = feline] I asked the service to get the original 2 rear speakers They said 22 TL, I will take 40 TL of workmanship, I will wear the service yourself, I hope the sound system will be normal for me, it is enough for me. [/ QUOTE] My teacher 22 is very good. If this price is directly, I can go and get it from him. It will be easier to wear the apparatus. [QUOTE = brutal] dull forward. If you want to use it as a friend, you can buy a 40cm TL, 13cm sony column, I would recommend it, it sounds good, it does not explode easily. [/ QUOTE] Yes, when I changed it, I want them not to be too bad. I also looked at the pioneer. Since these will not be original, what kind of problems can I have in your connection .. [QUOTE = senol73] [QUOTE = ufuk91] friends, the rear speakers of the 2000 model 206m, I think they crack when I open the burst bass, I am not an enthusiastic person in the system, but I want the sound to crack when I turn it up a little bit. I am thinking of changing the two as far as I learned, the rear speakers are 13 centimeters. and I can change it, it was easy to open the floor before, but I don't know how the speaker changes. The ears used for connecting can be different. The connection points of the original speaker to the door sheet are made with rivets. You can fix this problem. The original speakers have connection sockets. However, the speakers you just bought will not be there if you want them. So you can make the connection by getting a bridge before the cable socket. If you buy the original speaker, there will be no need for these sockets. [/ QUOTE] There are tt values or inappropriate ranges, and as you understand, it seems that I will give up the beautiful pioneers I have seen to 50tl because it is not original after fitting. I wonder how much difference is between the originals and by the way. There were 4 screw places I saw from Pioneers, the speaker frame is in place, but when I open it from the car, I see (as far as I remember) there are more than 4 ports, my head is confused at this point.

Before I forget, let me also ask, how does the connection of the speaker to the electricity and the tape have a different connection than normal, so I ask more or less than I can see because I have never seen it in the car before <= "text /" = "" = "/ B1D671CF-E532 -4481-99A to-19f420d90332etdefend is / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0 ">

There is no problem with the cables, only the directions are different. It is also for the sound quality. You will attach the thin-tipped cable to the thin-tipped place, that is, (-) the thick-tipped cable (+) where the thick one is. Do not forget to replace the sponge that surrounds the loudspeaker alone. I put the problem fixed.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = senol73] no problem different directions. It is also for the sound quality. You will attach the thin-ended cable to the thin-tipped place, that is, the (-) thick-thick cable (+).

You can also tighten it from the short smart bolts where the speaker ears do not meet in the door sheet.

Do not forget to replace the sponge that surrounds the loudspeaker alone, because if you do not install it, there is a flow of air towards the feet. div>

when you open the ready door trim, look at the other riveted places. The ones were deformed. It was making sound from the inside. I tightened the bolts and nuts in the places of the rivets. The sound was cut off. also the door I opened it, the bumpy substance (!) they put in the front insulation was completely torn, so I closed the front well with the sound insulation sponge I bought from a building market, the back ones were relatively strong, so I just siliconed the places opened from the edges. If I try to do the speaker job, I will remove the mold without breaking it, I add the sponge I bought and close it uniformly, and I think it would be even better. As you said okay, there is a normal speaker connection, no problem, let me get started in my first free time :))

Buy 1 pair of speakers, change the door sponge open according to your quality budget.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = Cmoss06] Get 1 pair of speakers open the door pandisot according to the change. If you can cut the original speaker socket, if you can't do the solder, the & nbsp; female will get 4 plugs.

<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = feline] easy to come [/ QUOTE ]

thank you very much hodja, if the rainy weather passes, I hope I will handle it :)

08.05.2020 16:42	# 9
feline
let it come easy

	206 rear speaker help
• Homepage » PEUGEOT MODIFIED PLATFORM » Peugeot Sound Systems

08.05.2020 16:42	# 1
ufuk91
I think the back speakers of the 2000 model 206m are cracked when I turn on the blast bass a little, I want to sound like a crazy sound system, but when I turn up the sound, I want the sound to crack, I think to change the two as far as I learned, the rear speakers are 13 centimeters, & nbsp; I'm going to ask, is there any 13cm speakers that I will get stuck here? and I can change it, easy to open the floor, I opened it before but I don't know how the speaker changes

08.05.2020 16:42	# 3
brutal
If you say I can use it in a dull future, my friend can buy a 40 cm tl with 13cm sony column.

08.05.2020 16:42	# 4
senol73
[QUOTE = ufuk91] friends, the rear speakers of the 2000 model 206m, I guess they give cracked sound when I open the bass bass a little, I am not an enthusiastic sound system like crazy, but when I turn the sound a little bit, I want the sound to crack, as far as I learned to change the two, the rear speakers are 13 centimeters, & nbsp; I'm going to ask, is there any 13cm speakers that I will buy? and I can change it, it's easy to open the floor before, but I don't know how the speaker changes [/ QUOTE] my teacher, you can disassemble it yourself, just make your hand a bit tired. It can be any 13 cm speaker, but it would be better if you disassemble it and take it accordingly because sometimes the ears used when connecting the speaker to the body may be different. the connection points of the original speaker to the door sheet are made with rivets. With the help of a screwdriver, you can detach it by removing it. You can connect the new speaker that you bought in this way. It will be difficult to connect with a rivet so you can fix this problem by getting bolts and nuts suitable for those holes. original speakers have connection sockets, but they won't be on the new speaker you want, so you can make the connection by getting a bridge before the cable socket. If you buy original speakers, they will have sockets, so there is no need for them.

08.05.2020 16:42	# 10
Cmoss06
Buy 1 pair of speakers, change the door sponge open according to your quality budget.

08.05.2020 16:42	# 11
ufuk91
<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = Cmoss06] Get 1 pair of speakers open the door pandisot according to the change. If you can cut the original speaker socket, if you can't do the solder, the & nbsp; female will get 4 plugs.

08.05.2020 16:42	# 12
ufuk91
<= "text /" = "" = "/ B1D671CF-E532-4481-99AA-19F420D90332etdefender / huidhui.js? 0 = 0 & amp; 0 = 0 & amp; 0 = 0"> [QUOTE = feline] easy to come [/ QUOTE ] thank you very much hodja, if the rainy weather passes, I hope I will handle it :)