Peugeot Forums - Peugeot Fan Club

206 REAR DOOR FLOOR REMOVAL

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 206
08.05.2020 17:59 # 1
GBoz35
Friends I want to replace the hoppers of my 2001 model 206 car on the back doors. I have exploded, do you know how to remove or remove the back doors?
08.05.2020 17:59 # 2
Alicilik
Wait AZ, I'll assign a detailed document when I get home
08.05.2020 17:59 # 3
GBoz35
thanks dude :)
08.05.2020 17:59 # 4
Alicilik
[QUOTE = SEDRA]
1. Special tool kit
Figure: e5af009c Resmi tam ekran göster
[1] Pliers (-). 1311.
2. Removal
Open the door.
Lower the glass to the lowest point.
Figure: c4ak01kc Resmi tam ekran göster
Remove:
  • Lever (1) (according to equipment)
  • Detection (2)
  • Holding (3) honeycomb
Open the clip:
  • Ornamental ring on the remote hopper (4)
  • Door trim (5) (with the help of device [1])
3. Alias
Apply disassembly in reverse order.
[/ QUOTE]
08.05.2020 17:59 # 5
GBoz35
your scheme does not appear, but i figured it out thanks :) for those who don't know, let me tell you that they don't scratch like me :) first I pressed the glass lift arm a little forward, I looked at it or I should have gone, I pulled mine was not tight. Then I unscrewed the bolt inside the handle of the door, then I removed the frame around the opening handle of the door and finally I pulled out the clips holding the door, of course the surprise to me is that the hoppers in the back door were not bolted to the door, they were riveted, they did some work :)
Peugeot Forums - Peugeot Fan Club © 2024
“The most auspicious of people, it is people who are useful.”